User Manual

PN 365-095-31684 x.1 SURFboard SBG6950AC2 & SBG7400AC2 Wireless Gateway User Guide

Chapter 4

Installing the Gateway

Caution: This product is for indoor use only. Do not route the Ethernet cable(s) outside of the

building. Exposure of the cables to lightning could create a safety hazard and damage the

product.

Connect Your Wireless Gateway and Computer

Before installing your wireless gateway:

 Check with your service provider (or local cable company) to ensure broadband cable

service is available in your area.

To set up a wireless network, you will need a high-speed Internet connection provided by

an Internet service provider.

Note: When contacting your service provider, you may need your gateway

information listed on the gateway label on the bottom of your wireless gateway (see

Gateway Label page 17).

 Choose a location in your home where your computer and wireless gateway are

preferably near existing cable and electrical wall outlets.

For the best Wi-Fi coverage, a central location in your home or building is recommended.

Note: The following installation procedure covers the wired Ethernet connection

process so that you can confirm that your wireless gateway was properly installed

and can connect to the Internet.