User Manual

Chapter 8: Protecting & Monitoring Your Wi-Fi Network
PN 365-095-31684 x.1 SURFboard SBG6950AC2 & SBG7400AC2 Wireless Gateway User Guide
Copyright 2017, ARRIS Enterprises, LLC. All rights reserved. 50
5. Enter the least significant byte of the starting IP address in the MAC Address field.
6. Click Add MAC Address.
7. Repeat steps 3 thru 6 for each MAC address that you want to add.
8. Click Apply, when done.
Set Up Port Triggers
You can use Port Triggers to configure dynamic triggers to specific devices on your LAN. This
allows special applications that require specific port numbers with bi-directional traffic to
function properly. Applications such as video conferencing, voice, gaming, and some
messaging program features may require these special settings.
Note: If you enable the firewall and set up custom port triggers, then you must configure the
firewall to allow traffic through those custom ports. See Set Up Firewall Protection (page 45)
for more information.
To configure Port Triggers:
1. From any gateway Web Manager screen, click the Firewall main menu button on the
gateway Web Manager menu bar.
2. Click PORT TRIGGERS from the Firewall submenu options list to display the Port Triggers
Configuration screen.
Figure 37: Advanced Port Triggers Screen
3. Click Add button to open the Add Port Trigger screen.
Figure 38: Add Port Triggers Screen