SB8200 DOCSIS© 3.
In the box What you should know The SURFboard SB8200 is a DOCSIS 3.1 cable modem that provides secure ultra high-speed Internet access and faster data transmission speeds over the broadband connection on your home or small business network. SB8200 cable modem To get started, you must have a live broadband cable connection already set up in your home to install the SB8200. If you do not, you will have to contact a cable service provider of your choice for assistance.
Cable modem label The cable modem label is also located on the bottom of your SB8200. To receive high-speed internet service, your service provider may request the Media access control (MAC) address (see HFC MAC ID) and Serial number (see S/N) listed on the cable modem label.
1 Install the cable modem The ARRIS SURFboard website should open. • If the web page opens, your SB8200 was set up properly. • If the web page fails to open, first check each cable connection on your devices to ensure that they are securely connected. Then, retype the URL. If still unsuccessful, you may have to contact your current service provider to either set up your internet service or activate your SB8200. 5.
© 2019 ARRIS Enterprises, LLC. All rights reserved. ARRIS, SURFboard, and the ARRIS logo are all trademarks or registered trademarks of ARRIS Enterprises LLC. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks or the names of their products. ARRIS disclaims proprietary interest in the marks and names of others.
