User`s guide

A
C
B
D
F
E
H
G
Secure
WLAN
B E
CA
D F H J
G I
24
Safety
Getting
Started
Battery
Installation
Installation
Wireless
Configuration
Ethernet
Configuration Usage Troubleshooting Glossary
Touchstone WTM652 Telephony Modem User’s Guide
Front Panel
The front of the Telephony Modem has the following indicators:
A Battery: (WTM652G only) indicates the battery status.
B Telephone 1/2: indicates the status of each telephone line.
C Secure: indicates Wireless Protected Setup (WPS) is active.
D WLAN: indicates the status of the wireless LAN.
E LAN 1–4: indicates the status of each Ethernet port.
F Link: indicates Ethernet or wireless connectivity between the Telephony-
Modem and computers.
G Online: indicates internet data transmission status.
H US: indicates upstream connectivity.
I DS: indicates downstream connectivity.
J Power: indicates whether AC power is available to the unit.
Rear Panel
The rear of the Telephony Modem has the following connectors and controls:
A Tel 1 (A/B models): connector for the first phone line.
Tel 1/2 (G models): connector for the first phone line (or both lines of a
2-line phone).
B Tel 2: connector for the second phone line.
C Antenna: connector for the wireless antenna.
D Ethernet: for use with a computer LAN port.
E Router Reset button: resets the Ethernet and wireless ports without af-
fect ing telephony service.
F TM Reset button: resets the Telephony Modem as if you power cycled the
unit. Use a pointed non-metallic object to press this button.
G Cable: connector for the coaxial cable.
H Power: connector for the power cord.