User`s guide

Selecting an Installation Location

There are a number of factors to consider when choosing a location to install your

Telephony Modem:

• Is an AC outlet available nearby? For best results, the outlet should not be

switched and should be close enough to the Telephony Modem that exten-

sion cords are not required.

• Is a cable jack available? For best performance, keep the number of split-

ters between the jack and cable drop to a minimum. Each splitter attenuates

(re duces) the signal available to the Telephony Modem. A large number of

split ters can slow down the Internet connection and even affect your tele-

phone service.

• Can you easily run cables between the Telephony Modem’s location and the

phones?

• If you are connecting devices to the Ethernet ports, can you easily run ca-

bles between the Telephony Modem’s location and those devices?

• If you want to mount the Telephony Modem on a wall, does the location pro-

vide a solid surface for secure attachment? For best results when mounting

the Telephony Modem on drywall, position the Telephony Modem so at least

one of the screws are fastened to a stud. This may prevent the Telephony

Modem from pulling out of the wall in the future.

• If you want to install the Telephony Modem on a desktop, is there enough

space on either side to keep the vents clear? Blocking the vents may cause

overheating.

• How close are your wireless devices? The Telephony Modem wireless con nec-

tion range is typically 100–200 feet (30m–65m). A number of factors can af-

fect connection range, as described below.

Touchstone WTM652 Telephony Modem User’s Guide

Safety

Getting

Started

Battery

Installation

Wireless

Conﬁguration

Ethernet

Conﬁguration Usage Troubleshooting Glossary