User`s guide

Cable Modem Start Up Sequence

Using the Reset Buttons

Use the Router Reset button to reset the Ethernet and wireless connections with-

out affecting the cable or telephony connections. You may need to reset the router

if you are having problems connecting to the Internet, but the phones are working.

To reset the Telephony Modem to factory defaults, hold the Router Reset button

for about 8 seconds.

Use the TM Reset button to reset the mo dem as if you power cycled the entire

unit. The phones will be out of service until the Telephony Modem ﬁnishes recon-

necting to the cable system. You may need to reset the Telephony Modem if you are

having problems connecting to the Internet or with the phones. This button should

be used rarely.

The TM Reset button is recessed to prevent accidental resets. Use a pointed non-

metallic object to press this button.

The diagram to the left shows the location of the Reset buttons.

DS US Online Link Description

Flash Off Off Off Downstream search

On Flash Off Off Downstream found; upstream search

On On Flash Off

Downstream and Upstream found;

retrieving setup information from

cable operator

Touchstone WTM652 Telephony Modem User’s Guide

Safety

Getting

Started

Battery

Installation

Wireless

Conﬁguration

Ethernet

Conﬁguration Usage Troubleshooting Glossary

Router Reset

TM Reset