User's Manual

Product
Maintenance
The CR100 does not require maintenance, as long as it is properly installed
following the guidelines stated in this manual. It is recommended that all RF
connectors be periodically checked for corrosion, strain relief, and the integrity
of power connections
Operation
The in-building repeater operates automatically and does not require user
intervention. There are no user controls, except for a sliding switch to allow a
user to connect additional subscriber antenna on the repeaters secondary
port for increased coverage area.
The front panel has two system status LEDs. A green ‘Power’ lamp indicates
that the repeater is operating. An ‘Status’ lamp indicates a fault.