* *Terms Apply - Download Welcome Pack for Details BEDIENUNGSANLEITUNG MODE D’EMPLOI MANUAL DE INSTRUCCIONES 说明书 取扱説明書
Contents Page Page WARNINGS 3 Differential Exploded View MEGA/BLS 24 KIT OVERIVIEW 3 Differential Removal BLX 25 Differential Exploded ViewBLX 26 REQUIRED 4 RADIOGEAR 5 RADIO-GEAR MAINTENANCE Overview 5 Steering Trim 5 Throttle Trim 5 Steering Access 27 Binding 5 Servo Removal 28 Dual Rate 6 BLANK CHASSIS SETUP SHEETS 29 Battery Status 6 EXPLODED VIEWS 31 Factory Defaults 6 OPTION PARTS AND UPGRADES 41 6 CE STATEMENT 42 ELECTRONIC SPEED CONTROL (ESC) Specificatio
Battery Mode Batteriemodus Mode de Batterie Modo de batería バッテリーモード 电池模式 If using LiPo batteries you must set the correct battery mode on the ESC (electronic speed controller) to prevent battery damage. Wenn Sie LiPo-Akkus verwenden, muss der entsprechende Batteriemodus am Fahrtregler angewählt sein, um Schäden an der Batterie durch Tiefentladung zu verhindern.
Kit Overview Überblick Aperçu du Kit Descripción del Kit キットの概要 ARRMA RAIDER ARRMA GRANITE 产品概观 ARRMA FURY US Design Patent application no. 29/392 417 Community Design No: 001275770-0001 1.3mm 1.5mm 2.0mm 2.5mm Cross wrench Kreuzschlüssel Clé en croix Llave de cruz クロスレンチ Shock pre-load spacers Federvorspannklipse Calles de précontrainte Anillas de precarga ショック プレロードスペーサー 十字套筒 避震器垫片 ATX ATX ATX ATX ATX ATX 2.4.Ghz Transmitter 2.4.Ghz Sender 2.4.Ghz Emetteur 2.4.Ghz Emisora 2.4Ghz 送信機 2.
Radio Gear Fernsteuer Ensemble radio Equipo de radio 送受信機 无线电设备 ARRMA ATX100 2.
Dual Rate Dual-Rate Dual Rate デュアルレイト Ajuste del ratio doble Battery Status Batterie-Status 双速率 Statut de Batterie Estado de la batería バッテリーステータス 电池状态 If battery status LED is flashing, the batteries need to be replaced. Wenn die Batterie-Status-LED blinkt, müssen die Batterien des Senders erneuert werden. Si la LED de statut flashe, la batterie du doivent être remplacées.
ESC Specifications Reglerspezifikationen Spécifications du variateur électronique Especificaciones del ESC ESC の仕様 ESC 规格 6-7 NiMh (7.2-8.4v) / 2S LiPo (7.
Battery Fitting Einsetzen Der Akkus Raccordement De Batterie Colocación De Baterías バッテリーの装着 组装电池 AA x4 ii i Running Fahr Conduite Conducción 走行の 操作 Post-Drive Checks Nach dem Fahren Comprobaciones tras la conducción Vérifications après avoir piloté チェックを駆動した後に 運行後的檢查 i ii DESIGNED FAST. DESIGNED TOUGH. 8 © 2013 ARRMA Durango Ltd. A subsidiary of Hobbico, Inc.
Maintenance Recommended Tools Supplied Allen Keys Not Supplied Hex Drivers Nut Drivers 1.3mm (0.050") 5.5mm 1.5mm 7mm 1.3 (0.050"), 1.5, 2, 2.5mm Turnbuckle Wrench 2mm 4mm Cross wrench 2.5mm HAZARDOUS/FLAMMABLE: Adult supervision required, use only in a well ventilated area and away from sources of ignition.
Chassis Maintenance Online videos when you see this icon >> Tools Required Cloth Brush ARRMA-RC.COM/ SUPPORT/ Automotive Brake Cleaner or Nitro Car Cleaner N.B. Raider chassis shown as an example - information applies to all variants. Wheel and Tyre Maintenance N.B. FURY shown as an example - information applies to all variants. Tools Required 2 1 ARRMA-RC.COM/ SUPPORT/ 7mm Nut Driver or Cross Wrench Tyre Glue 3 DESIGNED FAST. DESIGNED TOUGH. 4 10 © 2013 ARRMA Durango Ltd.
Slipper Clutch Adjustment Tools Required ARRMA-RC.COM/ SUPPORT/ 2mm Hex Driver 5.5 & 7mm Nut Driver or Cross Wrench 2 1 Factory Setting-Werkseinstellung-Réglage d'usine-Padrón- 出厂设置 - 出荷時設定 MEGA/BLS/BLX 1. Fully tighten locknut clockwise. Kontermutter festziehen im Uhrzeigersinn. Serrer l’écrou complètement. Apriete completamente contratuerca en sentido horario. 完全锁紧螺母顺时针方向拧紧。完全にロックナットを時計回りに締め 2. Loosen 3 turns. Rückgängig 3 Umdrehungen. Desserrez les 3 tours. Afloje 3 turnos.
Slipper Pad Replacement Tools Required ARRMA-RC.COM/ SUPPORT/ PH1 Screwdriver or 2mm Hex Driver 5.5 & 7mm Nut Driver or Cross Wrench 2 1 3 4 Slipper Pads PN: 310018 6 5 DESIGNED FAST. DESIGNED TOUGH. 12 © 2013 ARRMA Durango Ltd. A subsidiary of Hobbico, Inc.
Slipper Pad Replacement Tools Required ARRMA-RC.COM/ SUPPORT/ 2mm Hex Driver 5.5 & 7mm Nut Driver or Cross Wrench 2 1 3 4 Slipper Pads PN: 310018 6 5 © 2013 ARRMA Durango Ltd. A subsidiary of Hobbico, Inc. 13 WWW.ARRMA-RC.
Driveshaft Maintenance Tools Required ARRMA-RC.COM/ SUPPORT/ Cloth 7mm Nut Driver or Cross Wrench 1 2 3 4 Grease Long-nose Pliers Cross Wrench Long-nose Pliers Rear Axle Maintenance Tools Required ARRMA-RC.COM/ SUPPORT/ 7mm Nut Driver 2 1 DESIGNED FAST. DESIGNED TOUGH. or 14 © 2013 ARRMA Durango Ltd. A subsidiary of Hobbico, Inc.
Rear Axle Maintenance (cont.) 3 4 5 Wheel Bearing Replacement Tools Required ARRMA-RC.COM/ SUPPORT/ 7mm Nut Driver or Cross Wrench Long-nose Pliers 2 1 3 4 5 6 7 8 © 2013 ARRMA Durango Ltd. A subsidiary of Hobbico, Inc. 15 WWW.ARRMA-RC.
Factory Settings Front Shocks FIXED 1.5mm Ride Height 27.5 Piston mm -1.0 Rear Camber Link position 350 cst 350 cst ° Spring 45mm 63.5gf/mm 70mm 40gf/mm Differential Oil wt. Ride Height 28 mm Camber -0 FIXED 2 x 1.3mm ° Toe Angle 0 (Zero) 2 x 1.3mm Rear Oil wt. Camber Lower shock position Front ° 3000 cst Motor/Gears Motor Spur Gear MEGA 15T 81T 48dp ESC Pinion Gear MEGA 22t 48dp Lower shock position Factory Settings Front Shocks FIXED 0.
Factory Settings Front Shocks FIXED 0.75mm Piston Ride Height 38.5 mm 0 (Zero) Rear Camber Link position 350 cst 350 cst ° Spring 50mm 73.5gf/mm 72mm 47gf/mm Differential 39 -0 3000 cst Oil wt. Ride Height mm Camber FIXED 2 x 1.3mm ° Toe Angle Lower shock position 2 x 1.3mm Rear Oil wt. Camber -1.0 Front ° Lower shock position Motor/Gears Motor Spur Gear MEGA 15T 87t 48dp ESC Pinion Gear MEGA 18t 48dp Factory Settings Front Shocks FIXED 0.
Factory Settings Front Shocks 24.2 1.5mm Ride Height 27.5 Piston mm -1.0 Rear Camber Link position 350 cst 350 cst ° Spring 45mm 63.5gf/mm 70mm 40gf/mm Differential Oil wt. Ride Height 28 mm Camber -0 25.4mm 2 x 1.3mm ° Toe Angle 0 (Zero) 2 x 1.3mm Rear Oil wt. Camber Lower shock position Front ° 3000 cst Motor/Gears Spur Gear Motor BLS 4000kV 81T 48dp ESC Pinion Gear BLS 25t 48dp Lower shock position Factory Settings Front Shocks 40.1mm 0.
Front Shocks 40.1mm 0.75mm Piston Ride Height 38.5 mm Lower shock position Rear Camber Link position 350 cst 350 cst ° Spring 50mm 73.5gf/mm 72mm 47gf/mm Differential mm Camber -0 3000 cst Oil wt. Ride Height 39 47mm 2 x 1.3mm ° Toe Angle 0 (Zero) 2 x 1.3mm Rear Oil wt. Camber -1.0 Front ° Motor/Gears Spur Gear Motor BLS 4000kV 87t 48dp Lower shock position ESC Pinion Gear BLS 22t 48dp Factory Settings Front Shocks 40.1mm 0.75mm Piston Ride Height 38.
Factory Settings Front Shocks 24.2mm 1.5mm Ride Height 27.5 Piston mm -1.0 Rear Camber Link position 350 cst 350 cst ° Spring 45mm 63.5gf/mm 70mm 40gf/mm Differential Oil wt. Ride Height 28 mm Camber -0 25.4mm 2 x 1.3mm ° Toe Angle 0 (Zero) 2 x 1.3mm Rear Oil wt. Camber Lower shock position Front ° 10000 cst Motor/Gears Motor Spur Gear BLX 3900kV 54T 0.8M ESC Pinion Gear BLX 17t 0.8M Lower shock position Factory Settings Front Shocks 40.1mm 0.
Front Shocks 40.1mm 0.75mm Piston Ride Height 38.5 mm Lower shock position Rear Camber Link position 350 cst 350 cst ° Spring 50mm 73.5gf/mm 72mm 47gf/mm Differential 39 -0 10000 cst Oil wt. Ride Height mm Camber 47mm 2 x 1.3mm ° Toe Angle 0 (Zero) 2 x 1.3mm Rear Oil wt. Camber -1.0 Front ° Lower shock position Motor/Gears Motor Spur Gear BLX 3900kV 57t 0.8M ESC Pinion Gear BLX 15t 0.8M Factory Settings Front Shocks 40.1mm 0.75mm Piston Ride Height 38.
Motor Removal Tools Required ARRMA-RC.COM/ SUPPORT/ or PH1 Screwdriver 7mm Nut Driver 1 2 3 4 DESIGNED FAST. DESIGNED TOUGH. or Cross Wrench 2mm Hex Driver 22 © 2013 ARRMA Durango Ltd. A subsidiary of Hobbico, Inc.
Differential Removal and Replacement ARRMA-RC.COM/ Tools Required SUPPORT/ 1.3mm Hex Driver 2mm Hex Driver 2.5mm Hex Driver Cross Wrench Long-nose Pliers 4 6 5 © 2013 ARRMA Durango Ltd. A subsidiary of Hobbico, Inc. or 2 1 3 7mm Nut Driver 23 WWW.ARRMA-RC.
Differential Removal and Replacement (cont.) 8 7 9 11 10 Differential Exploded View DESIGNED FAST. DESIGNED TOUGH. 24 © 2013 ARRMA Durango Ltd. A subsidiary of Hobbico, Inc.
Differential Removal and Replacement ARRMA-RC.COM/ Tools Required SUPPORT/ 1.3mm Hex Driver 2mm Hex Driver 2.5mm Hex Driver Cross Wrench Long-nose Pliers 4 6 5 © 2013 ARRMA Durango Ltd. A subsidiary of Hobbico, Inc. or 2 1 3 7mm Nut Driver 25 WWW.ARRMA-RC.
Differential Removal and Replacement (cont.) 8 7 9 11 10 Differential Exploded View DESIGNED FAST. DESIGNED TOUGH. 26 © 2013 ARRMA Durango Ltd. A subsidiary of Hobbico, Inc.
Radio-gear Maintenance Receiver Access ARRMA-RC.COM/ SUPPORT/ Tools Required 2mm Hex Driver 2 1 Steering Maintenance Steering Access Tools Required ARRMA-RC.COM/ SUPPORT/ 2mm Hex Driver 1 2 3 4 © 2013 ARRMA Durango Ltd. A subsidiary of Hobbico, Inc. 27 7mm Nut Driver or Cross Wrench Long-nose Pliers WWW.ARRMA-RC.
Steering Access (cont.) 6 5 5.5mm Servo Removal Tools Required ARRMA-RC.COM/ 2mm Hex Driver SUPPORT/ 2 1 Throttle (CH2) Steering (CH1) 3 DESIGNED FAST. DESIGNED TOUGH. 4 28 © 2013 ARRMA Durango Ltd. A subsidiary of Hobbico, Inc.
Settings Shocks Front Ride Height Piston Front Rear mm Oil wt. Camber Lower shock position ° Spring Toe Angle ° Rear Camber Link position Differential Oil wt. Ride Height mm Camber ° Motor/Gears Motor Spur Gear ESC Pinion Gear Lower shock position Settings Shocks Front Ride Height Piston Front Rear mm Camber Oil wt. ° Toe Angle Lower shock position Rear Spring ° Camber Link position Differential Oil wt.
Settings Shocks Front Piston Ride Height Front Rear mm Oil wt. Camber ° Spring Toe Angle ° Lower shock position Rear Camber Link position Differential Oil wt. Ride Height mm Camber ° Motor/Gears Motor Spur Gear ESC Pinion Gear Lower shock position Settings Shocks Front Piston Ride Height Front Rear mm Oil wt. Camber ° Spring Toe Angle ° Lower shock position Rear Camber Link position Differential Oil wt.
© 2013 ARRMA Durango Ltd. A subsidiary of Hobbico, Inc.
DESIGNED FAST. DESIGNED TOUGH.
© 2013 ARRMA Durango Ltd. A subsidiary of Hobbico, Inc.
Raider DESIGNED FAST. DESIGNED TOUGH.
© 2013 ARRMA Durango Ltd. A subsidiary of Hobbico, Inc.
Centre Centro Fury DESIGNED FAST. DESIGNED TOUGH.
© 2013 ARRMA Durango Ltd. A subsidiary of Hobbico, Inc.
DESIGNED FAST. DESIGNED TOUGH.
© 2013 ARRMA Durango Ltd. A subsidiary of Hobbico, Inc.
DESIGNED FAST. DESIGNED TOUGH.
Ancillaries & Bodies Accesorios y carrocerías Peripherie & Karosserien 付属品とボディ AR390063 ATX100 Transmitter AR390095 BLS 4000kV Brushless Motor AR402090 AR402091 AR402110 Raider BLS Body (Green) Raider BLS Body (Blue) Raider Body (Clear) AR402002 Raider Rear Wing AR402098 AR402099 AR402114 AR402076 Vorteks BLS Body (Red) Vorteks BLS Body (Blue) Vorteks Body (Clear) Vorteks Wing (Clear) AR402094 AR402095 AR402115 Granite BLS Body (Red) Granite BLS Body (Blue) Granite Body (Clear) © 20
CE STATEMENT Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC.
C E S T A T E M E N T E u r o p e – E U D e c l a r at i o n o f C o n f o r m i t y EL Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ ARRMA Durango Limited ΔΗΛΩΝΕΙ ΟΤΙ ATX 100/ARX 100 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ. FR Français [French] Par la présente ARRMA Durango Limited déclare que l’appareil ATX 100/ARX 100 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
ghts reserved. © Copyright ARRMA Durango Ltd. 2013. ARRMA-RC.