User manual ARA4215V3BIT2-COPY-1

WWW.ARRMA-RC.COM
Insert the Bind Plug in the
BIND port on the receiver.
Connect a fully charged battery
pack to the ESC.
Power on the ESC. The red
LED flashes, indicating the
receiver is in bind mode.
Center the ST TRIM and TH
TRIM dials on the transmitter.
Power the transmitter on. The receiver LED will stop
flashing.
Remove the Bind Plug, then
power off the ESC to save the
settings.
Power off the transmitter.
Bind socket
22