VENDETTA 4X4 3S Manual

WWW.ARRMA-RC.COM

Input Voltage

2S-3S LiPo (7.4-11.1v) 50C 5000mAh

Minimum Req. 6-8 Cell NiMh (7.2v-9.6v)

BEC Output 6.0v/4A Max

Connect batteries, turn on TX and press/hold the set button ‘A’. Turn the switch on

1. TX in neutral - press set

2. TX full throttle - press set

3. TX full brake - press set

Only use fully charged LiPo batteries (4.2V per cell) to prevent

battery/ESC damage.

Battery Plug

WARNING: Heat sink

may be hot after use.

Receiver Plug (CH2)

Power Switch & Set button

Motor wires x 3