User's Manual

1 1
1 1
1 Position Truss Assembly on build-
ing by sliding column gussets over
center columns and fasten with 8
bolts and nuts on each gusset.
2 2
2 2
2 Position
rightright
rightright
right and
left side eaveleft side eave
left side eaveleft side eave
left side eave
channelschannels
channelschannels
channels over eave brackets and
fasten with a bolt and nut. Front and
rear frames overlap side eave chan-
nels. Fasten overlaps with 3 bolts
and nuts. Fasten corner panels to
channels using 4 screws.
NOTENOTE
NOTENOTE
NOTE
On the 1431, fasten the side
eave channels over eave brackets
using bolts and nuts.
Step 10Step 10
Step 10Step 10
Step 10
BX26
● Parts Needed For ●
TT
TT
T
rr
rr
r
uss/Tuss/T
uss/Tuss/T
uss/T
op Fop F
op Fop F
op F
rr
rr
r
amesames
amesames
ames
●●
●●
●
Truss Assembly (1 14x21) (2 14x31) Truss Assembly (1 14x21) (2 14x31)
Truss Assembly (1 14x21) (2 14x31) Truss Assembly (1 14x21) (2 14x31)
Truss Assembly (1 14x21) (2 14x31)
●●
●●
●
9484 Right Side Eave Channel (2) 9484 Right Side Eave Channel (2)
9484 Right Side Eave Channel (2) 9484 Right Side Eave Channel (2)
9484 Right Side Eave Channel (2)
●●
●●
●
9485 Left Side Eave Channel (2) 9485 Left Side Eave Channel (2)
9485 Left Side Eave Channel (2) 9485 Left Side Eave Channel (2)
9485 Left Side Eave Channel (2)
●●
●●
●
9463 Side Eave Channel (2 14x31) 9463 Side Eave Channel (2 14x31)
9463 Side Eave Channel (2 14x31) 9463 Side Eave Channel (2 14x31)
9463 Side Eave Channel (2 14x31)
26
STEP
22
22
2
STEP
11
11
1
9485
(1421)
9484 Installed in Step 8
9485
9484
9463
9463
(1431)