user manual

Step 5. Attach the Left and Right Wings to the Platform using (4) #8xl/2" Panhead Screws (as shown in

FIG. 5). The long flanges facing outward and toward edge of Platform.

#8x1/2" Panhead Screws

FIG. 5

o o

Step 6.

Platform

Attach the Wings (with Platform) to the Carriage of the Lift Mechanism by laying the Back (with

Lift attached) in a flat position and aligning the top and bottom holes in Wing flanges with the

holes in the Lift Carriage. Insert the (8) 6mm Hex Head Bolts through the Wings and Carriage

and attach a Washer & Hex Nut to each Bolt (as shown in FIG. 6). Before tightening the Nuts and

Bolts using a 10mm wrench or adjustable wrench or pliers, use a square or the bottom shelf of

cabinet to square the platform with the back (as shown in FIG. 6B). Final assembly should

look like FIG. 6A.

FIG. 6A FIG. 6

This -_

or _P

This

@ @

® @

_ r-'*l I

FIG. 6B

.ex. a u*\Wis;er:

I Machine Platform

L,eft Wing

6mm x11mm Hex Head

Page 6

Lift Carriage

98300-6

98301-6

98302-6