User's Manual

30
●●
●●
●
Roof Beam Assembly (8) Roof Beam Assembly (8)
Roof Beam Assembly (8) Roof Beam Assembly (8)
Roof Beam Assembly (8)
●●
●●
●
Left Gable Assembly (2) Left Gable Assembly (2)
Left Gable Assembly (2) Left Gable Assembly (2)
Left Gable Assembly (2)
●●
●●
●
Right Gable Assembly (1) Right Gable Assembly (1)
Right Gable Assembly (1) Right Gable Assembly (1)
Right Gable Assembly (1)
●●
●●
●
9462 Roof Beam Assembly (5 14x31) 9462 Roof Beam Assembly (5 14x31)
9462 Roof Beam Assembly (5 14x31) 9462 Roof Beam Assembly (5 14x31)
9462 Roof Beam Assembly (5 14x31)
● Parts Needed For ●
Gables/Roof BeamsGables/Roof Beams
Gables/Roof BeamsGables/Roof Beams
Gables/Roof Beams
Step 14Step 14
Step 14Step 14
Step 14
STEP
11
11
1
STEP
STEP
22
22
2
33
33
3
BX30
11
11
1Lift and fasten a left gable assem-
bly in the same manner.
22
22
2Join the left and right gables to-
gether using a bolt and nut in the
third hole from the bottom only.
33
33
3Apply the
weather strippingweather stripping
weather strippingweather stripping
weather stripping
along the mating edge of the left and
right gables as shown. Cut the
weather stripping to length.
44
44
4Install roof beam assemblies to
the left side of building in the same
manner. Slide a roof beam assem-
bly over center gable flange and
other end over shear plates on truss
and fasten as before.
Repeat roof beam procedure for the
opposite end of building. Note that 4
hole cluster in roof beam assembly,
must be fastened toward truss.
STEP
44
44
4
NOTENOTE
NOTENOTE
NOTE
On the 1431, attach the roof
beams between the truss
assemblies as before
(1421)
Weather
Stripping
Tape
4 holes toward truss
(1431)
9462