User's Manual

44
● Parts Needed For ●
Roll-Up-DoorRoll-Up-Door
Roll-Up-DoorRoll-Up-Door
Roll-Up-Door
Step 28Step 28
Step 28Step 28
Step 28
BX44
●●
●●
●
7817 Spring Support Bracket (2) 7817 Spring Support Bracket (2)
7817 Spring Support Bracket (2) 7817 Spring Support Bracket (2)
7817 Spring Support Bracket (2)
●●
●●
●
67476 Right Horizontal Track (1) 67476 Right Horizontal Track (1)
67476 Right Horizontal Track (1) 67476 Right Horizontal Track (1)
67476 Right Horizontal Track (1)
●●
●●
●
67475 Left Horizontal Track (1) 67475 Left Horizontal Track (1)
67475 Left Horizontal Track (1) 67475 Left Horizontal Track (1)
67475 Left Horizontal Track (1)
●●
●●
●
9511 Truss Strut (2) 9511 Truss Strut (2)
9511 Truss Strut (2) 9511 Truss Strut (2)
9511 Truss Strut (2)
●●
●●
●
9506 Door Panel (1) 9506 Door Panel (1)
9506 Door Panel (1) 9506 Door Panel (1)
9506 Door Panel (1)
STEP
22
22
2
STEP
11
11
1
STEP
33
33
3
STEP
66
66
6
STEP
55
55
5
11
11
1Install
spring support brackets spring support brackets
spring support brackets spring support brackets
spring support brackets to
the roof beams using bolts shown.
22
22
2Attach the
right right
right right
right and
left horizontalleft horizontal
left horizontalleft horizontal
left horizontal
track track
track track
track to the right and left vertical track
using bolts and nuts shown.
33
33
3Fasten
track struts track struts
track struts track struts
track struts to open hole
on truss assembly using 1/4-20x1/2"
hex head bolt and square nut. Fas-
ten opposite end to spring support
bracket and horizontal track using
1/4-20x1/2" rib neck bolt and square
nut.
44
44
4Attach the
sheave sheave
sheave sheave
sheave (pulley wheel)
to the 3rd hole on the support angle of
the horizontal track using 3/8 - 16 x
1 1/2" hex head bolt and 3/8-16 hex
nut.
55
55
5Position fourth
door panel door panel
door panel door panel
door panel on third
door panel. Fasten top of hinges to
bottom of fourth door panel using
#10Bx1/2" truss head screws.
66
66
6Engage roller with
top adjustabletop adjustable
top adjustabletop adjustable
top adjustable
fixture, fixture,
fixture, fixture,
fixture, slide roller into horizontal
track. Move assembly to line up with
holes in end stile and fasten with
#10Bx1/2" truss head screws.
STEP
44
44
4
7817
1/4-20 Square Nut
#10-32 Square Nut
1/4-20 Square Nut
67476
ROOF BEAMS
1/4-20x1/2"
Hex Head Bolt
#10-32x5/16" Bolt
1/4-20 x 1 1/2"
Hex Head Bolt
1/4-20 Square Nut
1/4-20x1/2"
Hex Head Bolt
1/4-20x1/2"
Rib Neck Bolt
67475
1/4-20 Square Nut
1/4-20x1/2"
Rib Neck Bolt
TRUSS
ASSEMBLY
1/4-20x1/2" Hex Head Bolt
& Square Nut
9511
3rd HOLE
Sheave
3/8-16 x 1 1/2"
Hex Head Bolt
3/8-16
Hex Nut
#10Bx1/2"
Truss Head Screw
Top Fixture
Adjustment Nut
Door Panel (Top)
9506
Roller
END STILE