Full Product Manual
1 Assemble the four corners of the
oor frame using two screws at each
corner as shown. At the front corners
fasten bolts through from the bottom
with nuts on top.
2 Measure the oor frame diagonally.
When the diagonal measurements
are equal, the oor frame is square.
NOTE
If using a wood platform or
concrete slab do not fasten the
oor frames to your base at this
time. You will anchor the
building after it is erected.
Step 2
BI15
Parts Needed For
Floor Frame
9458 Front Floor Frame (1)
8972 Rear Floor Frame (1)
8971 Side Floor Frame (2)
The oor frame must be square and
level or holes will not align.
RIGHT
REAR
8972
8971
9458
STEP
2
STEP
1
FRONT
When Diagonal Measurements
are Equal the Floor Frame
is Square
8971
8972
RIGHT
FRONT
8971
9458
8971
Level
15