Use and Care Manual

CARE & MAINTENANCE...

Exterior Care:

For a long lasting ﬁ nish clean and wax the exterior surface. We recommend washing with a mild soap solution. DO

NOT use power washing to clean your shed. Using a spray automotive type wax periodically on the exterior is highly

recommended if you are in a high humidity or coastal climate region.

Combustibles and corrosives must be stored in air tight containers designed for chemical and/or combustible stor-

age. Corrosive chemicals such as fertilizers, pesticides and herbicides should be cleaned off the interior and exterior

surfaces immediately. Rust caused by chemical damage is not covered by the warranty.

DO NOT STORE POOL CHEMICALS IN YOUR SHED - THIS VOIDS YOUR WARRANTY

Rust protection precautions may help to stop rust from developing, or stop it quickly as soon as it appears.

• Avoid nicking or scraping the coating surface, inside and out.

• Keep roof, base perimeter and door tracks free of debris and leaves which may accumulate and retain moisture.

These can do double damage since they give off acid as they decay.

• Touch up scrapes or nicks and any area of visible rust as soon as possible. Make sure the surface is free of mois-

ture, oils, dirt or grime and then apply an even ﬁ lm of high quality touch-up paint.

• Various paint manufacturers provide products for rust treatment and coverage. If surface rust does appear on your

shed we recommend treating those areas as soon as possible, following the paint supplier of your choice instruc-

tions.

• Our customer service department can provide the paint tinting formula for matching the color of your shed. We also

have touch-up paint available for repairing small nicks and scratches.

Roof:

Keep the roof clear of leaves and snow. Heavy amounts of snow on the roof can damage the building making it

unsafe to enter. In snow country, Roof Strengthening Kits are available for most Arrow Buildings for added protection

against heavy snow accumulation.

Doors:

Always keep door tracks clear of dirt and other debris that prevent them from sliding easily. Lubricate door track

annually with furniture polish or silicone spray. Keep doors closed and locked to prevent wind damage.

Fasteners:

Use all washers supplied to protect against weather inﬁ ltration and to protect the metal from being scratched by

the screws. Regularly check screws, bolts, nuts, etc., and retighten as necessary.

General:

• A plastic sheet (vapor barrier) placed under the entire ﬂ oor area may reduce condensation.

• Wash off inked part numbers on coated panels with soap and water.

• Silicone caulking may be used for watertight seals throughout the building.