CD650_IFU_EN_UK.book Page 1 Monday, June 23, 2008 3:42 PM Register your product and get support at www.philips.com/welcome CD650 EN Telephone ! Warning Use only rechargeable batteries. Charge the handset for 24 hours before use.
CD650_IFU_EN_UK.
CD650_IFU_EN_UK.book Page 1 Monday, June 23, 2008 3:42 PM Table of contents 1 Important 3 5 Use more of your phone 19 1.1 Power requirements 3 5.1 Switch the handset on/off 19 1.2 Safety Information 3 5.2 Keypad lock/unlock 19 1.3 Conformity 4 5.3 Text or number entry 19 1.4 Using GAP standard compliance 5.4 Call in progress 19 4 5.5 Call waiting 20 1.5 Recycling and disposal 4 5.6 Caller Line Indentification 21 1.
CD650_IFU_EN_UK.book Page 2 Monday, June 23, 2008 3:42 PM 7.3 Set alarm 31 10 SMS 41 7.4 Set alarm tone 31 10.1 Write and send new SMS 41 10.2 View Inbox messages 42 10.3 Save a message in the Draft box 44 10.4 SMS settings 45 8 Advanced settings 32 8.1 Easy Call 32 8.2 Activate/Deactivate Conference mode 32 8.3 Call Barring 32 11 Technical data 47 8.4 Activate/Deactivate XHD Sound mode 33 12 Frequently asked questions 48 8.5 Change master PIN 33 8.
CD650_IFU_EN_UK.book 1 Page 3 Monday, June 23, 2008 Important Take time to read this user manual before you use your phone. It contains important information and notes regarding your phone. 1.1 Power requirements • This product requires an electrical supply of 220-240 volts AC. In case of power failure, the communication can be lost. • The Electrical network is classified as hazardous. The only way to power down the charger is to unplug the power supply from the electrical outlet.
CD650_IFU_EN_UK.book Page 4 Monday, June 23, 2008 1.3 Conformity We, Philips declare that the product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This product can only be connected to the analogue telephone networks of the countries mentioned on the packaging. You can find the Declaration of Conformity on www.p4c.philips.com. 1.
CD650_IFU_EN_UK.book Page 5 Monday, June 23, 2008 Disposal instructions for batteries: Batteries should not be disposed of with general household waste. 5. 3:42 PM Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products.
CD650_IFU_EN_UK.book 2 Page 6 Monday, June 23, 2008 3:42 PM Your phone Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. 2.1 What’s in the box Handset Base station Battery door 2 AAA rechargeable batteries Power supply Line cord* User manual Guarantee Quick Start Guide Note *You may find in the box the line adaptor delivered separately from the line cable.
CD650_IFU_EN_UK.book 2.2 Page 7 Monday, June 23, 2008 Overview of your phone A Earpiece B Event LED Blinks when there is a new missed call, SMS or Voicemail. Note If you have not subscribed to Caller Line Identification service, there will not be any alerts for new events. Hence, the event LED will not blink when there is a new call, SMS, or voicemail. C Display See page 9 for an overview of the display icons. D Left Softkey m Select the function displayed on the handset screen directly above it.
CD650_IFU_EN_UK.book Page 8 Monday, June 23, 2008 K Redial key a In idle mode: Access the Redial list. L Keypad lock key * In idle mode: Insert *. Long press to lock/ unlock the keypad. During a call: Insert *. M Ringer on/off key & Pause key # In idle mode: Insert #. Long press to turn the ringer on/off. During a call: Insert #. When predialling: Long press to insert a pause marked “P”. In editing mode: Long press to switch between upper and lower case.
CD650_IFU_EN_UK.book 2.3 Page 9 Monday, June 23, 2008 3:42 PM Display icons Indicates that the battery is fully charged. Icon blinks during charge and when the battery is low. Indicates that the battery is fully discharged. Indicates that an external call is connected or held. Icon blinks when receiving an incoming call. Indicates that there are existing SMS messages in the inbox. Icon blinks when there are new voicemail or unread SMS messages.
CD650_IFU_EN_UK.book 2.5 Page 10 Monday, June 23, 2008 3:42 PM Overview of the base station A Paging key C Page handset. Long press to start registration procedure.
CD650_IFU_EN_UK.book Page 11 3 Getting started 3.1 Connect the base station Monday, June 23, 2008 1 Place the base station in a central 2 location near the telephone line socket and electricity socket. Connect the line cord and the power cable to their corresponding connectors at the bottom of the base station as shown. 3:42 PM ! Warning Avoid placing the base station too close to large metal objects such as filing cabinets, radiators or electrical appliances.
CD650_IFU_EN_UK.book Page 12 Monday, June 23, 2008 3:42 PM 5 Slide the base down into place. 2 Turn the bracket upside down and then re-insert the bracket to the back of the base station. 3.3 Install your phone Before using the handset, the batteries have to be installed and fully charged. 3.3.1 Install battery ! Warning 3 Insert screws (not included) into the wall. Always use AAA rechargeable batteries supplied with your unit.
CD650_IFU_EN_UK.book Page 13 Monday, June 23, 2008 3.3.2 Charge battery ! Warning The handset must be charged for at least 24 hours before using it for the first time. When the battery level becomes low, the low battery sensor alerts you by sounding an audible tone and blinking the battery icon. If the battery level becomes exceedingly low, the phone automatically switches off and any function in progress will not be saved. 1 Place the handset on the charging cradle of the base station.
CD650_IFU_EN_UK.book Page 14 Monday, June 23, 2008 3:42 PM 3.5 Menu structure The table below describes the menu tree of your phone. Press M in idle mode to enter the main menu. Use navigation keys : to navigate within the menus and press left softkey m to enter each option. PHONEBOOK NEW ENTRY LIST EDIT ENTRY SELECT MELODY DELETE ENTRY DELETE ALL DIRECT MEMORY KEY 1 ...
CD650_IFU_EN_UK.book ADVANC.
CD650_IFU_EN_UK.
CD650_IFU_EN_UK.book Page 17 4 Using your phone 4.1 Make a call Monday, June 23, 2008 4.1.1 Predialling 1 Dial the number (maximum 24 digits). 2 Press r or v key. • The call is initiated. Tip You may insert a prefix number to the beginning of your predial number, see “Set Auto Prefix” on page 36 for more information. 4.1.2 Direct dialling 1 Press r or v key to take the 2 line. Dial the number. • The call is initiated. 4.1.3 Call from redial list 1 Press a key in idle mode.
CD650_IFU_EN_UK.book Page 18 Monday, June 23, 2008 3:42 PM phone setting, menu navigation, etc will be aborted. Danger When the handset rings during an incoming call, please do not hold the handset too close to your ear, as the volume of the ringing tone may damage your hearing. 4.2.1 Handsfree answering When the phone rings, press v key. • The handset loudspeaker is activated. Danger Handsfree activation can suddenly increase the volume in the earpiece to a very high level.
CD650_IFU_EN_UK.book 5 Page 19 Monday, June 23, 2008 Use more of your phone 5.1 Switch the handset on/off Press and hold e key for 3 seconds to switch on/off the handset in idle mode. 5.2 Keypad lock/unlock Press and hold * key for 2 seconds to lock/unlock the keypad in idle mode. 5.3 Text or number entry When you select a field in which you can enter text, you can enter the letters that are printed on the keys by pressing the relevant key once or several times.
CD650_IFU_EN_UK.book Page 20 Monday, June 23, 2008 3:42 PM 2 Press b to turn on the microphone. 5.4.3 Activate/Deactivate loudspeaker mode Danger Handsfree activation can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear. 1 During a call, press v key to activate the loudspeaker mode. 2 Press v key again to return to normal mode. 5.4.
CD650_IFU_EN_UK.book Page 21 Monday, June 23, 2008 information on this service. When you receive a second incoming call while on the phone, press r+2 key to put the current call on hold and answer the second call. OR - Press r+1 key to end the current call and answer the second call. - Press r+2 subsequently to toggle between these 2 calls. The above operations may be different according to your network. 5.
CD650_IFU_EN_UK.book 5.7.3 Page 22 Monday, June 23, 2008 Edit a phonebook entry 1 Press M in idle mode, press mSELECT to enter PHONEBOOK, scroll : to EDIT ENTRY and press mSELECT. 2 Scroll : to select an entry you wish to edit and press mSELECT. 3 Press >CLEAR to erase the letters 4 one by one, enter the name and press mOK. Press >CLEAR to erase the digits one by one, enter the phone number and press mOK. • A validation tone is emitted. 5.7.
CD650_IFU_EN_UK.book Page 23 Monday, June 23, 2008 5.7.7.1 1 2 3 4 5 6 Store Direct Access Memory Press M in idle mode, press mSELECT to enter PHONEBOOK, scroll : to DIRECT MEMORY and press mSELECT. Scroll : to select a key (Keys 1 to 9) and press mSELECT. • The stored number is displayed (if any). Press mOK to display the menu options. Press mSELECT to select EDIT Scroll : to the entry you wish to store as direct access memory and press mSELECT to view the details. Press mSELECT to confirm.
CD650_IFU_EN_UK.book Page 24 Monday, June 23, 2008 5.8.3 Delete a redial number 1 Press a in idle mode and scroll : to select an entry. 2 Press a, scroll : to DELETE and press mOK. 3 DELETE? is displayed on the screen. Press mOK again to confirm deletion. • A validation tone is emitted. 3:42 PM Note * If the identity of the caller is withheld or the network does not provide the date and time information, then only the date and time of the call will be displayed.
CD650_IFU_EN_UK.book Page 25 Monday, June 23, 2008 3 Press mOK to confirm deletion. • A validation tone is emitted. 5.9.4 Delete the call list 1 Press u in idle mode, press mSELECT to enter CALL LIST, scroll : to an entry in the call list and press mOPTION. Scroll : to DELETE ALL and press mSELECT. DELETE ALL? is displayed on the screen. Press mOK to confirm deletion. • A validation tone is emitted.
CD650_IFU_EN_UK.book Page 26 Monday, June 23, 2008 5.10.3 Answer an external call during intercom 1 When there is an incoming external call during an intercom, a new call tone is emitted. 2 To end the intercom and answer the external call, press e. The handset will ring. Press r to answer the external call. • Connection with the external call is established. Tip To put the internal call on hold and answer the incoming external call, press r key. 5.10.
CD650_IFU_EN_UK.book Page 27 Monday, June 23, 2008 3:42 PM 2 Scroll : to your desired volume 6 Personal settings 6.1 Change the Handset Name You can name the handset and display the handset name in idle mode. The default handset name of your handset is PHILIPS. 1 Press M in idle mode, scroll : to PERSONAL SETTING and press mSELECT, press mSELECT to enter HANDSET NAME. 2 Edit the handset name (maximum 14 characters) and press mOK to confirm.
CD650_IFU_EN_UK.book Page 28 Monday, June 23, 2008 6.3 Change the Display Language Your handset can support different display languages, depending on your country selection during the WELCOME mode. 1 Press M in idle mode, scroll : to PERSONAL SETTING and press mSELECT, scroll : to LANGUAGE and press mSELECT. 2 Scroll : to your desired language and press mSELECT to confirm. • A validation tone is emitted and the screen returns to previous menu.
CD650_IFU_EN_UK.book Page 29 Monday, June 23, 2008 3:42 PM Note By default, the backlight remains on for 20 seconds after each activation such as an incoming call, key presses, lifting the handset off the base station, etc. 6.8 Activate /Deactivate Auto Hang-up This function enables you to end a call automatically by simply replacing the handset on the base station. By default, the Auto Hang-up feature is ON.
CD650_IFU_EN_UK.book 7 Page 30 Monday, June 23, 2008 Clock and Alarm settings This feature allows you to set the date, time and alarm settings for your phone. The default date and time is 01-01 and 00:00 respectively. your ISDN system or contact your network provider. 7.2 Set date/time format You can set your preferred date/time format for your phone. The default format is DD-MM and 24 HOURS. 7.2.1 7.
CD650_IFU_EN_UK.book 7.3 Page 31 Monday, June 23, 2008 3:42 PM Set alarm 1 Press M in idle mode, scroll : 2 3 to CLOCK & ALARM and press mOK, scroll : to ALARM and press mSELECT. Scroll : to OFF, ON ONCE or ON DAILY and press mSELECT. If you select ON ONCE or ON DAILY, enter the time (hh-mm) for the alarm and press 2 to select A (am) or 7 to select P (pm) if the time is in 12 hours format. Press mOK to confirm. • A validation tone is emitted and the screen returns to previous menu.
CD650_IFU_EN_UK.book 8 Page 32 Monday, June 23, 2008 Advanced settings 8.1 Easy Call When activated, the Easy Call feature enables you to dial a number by pressing any key on your handset. This feature is very useful for direct access to emergency services. You can enter up to 24 digits for easy call number. 2 3 3:42 PM mSELECT, press mSELECT to enter EASY CALL. Scroll : to NUMBER and press mSELECT. • The last stored Easy Call number is displayed (if any).
CD650_IFU_EN_UK.book Page 33 Monday, June 23, 2008 • A validation tone is emitted and the screen returns to previous menu. 8.3.1 1 2 To activate/deactivate Call Barring Press M in idle mode, scroll : to ADVANC. SETTINGS and press mSELECT, scroll : to CALL BARRING and press mSELECT. Enter the master PIN when prompted and press mOK to confirm. Note By default, the master PIN is 0000. 3 Press mSELECT to enter MODE. 4 Scroll : to ON or OFF and press mSELECT to confirm.
CD650_IFU_EN_UK.book Page 34 Monday, June 23, 2008 Note The default PIN code is preset to 0000. If you change this PIN code, keep the PIN details in a safe place where you have easy access to them. Do not lose the PIN code. 1 Press M in idle mode, scroll : to ADVANC. SETTINGS and press mSELECT, scroll : to CHANGE PIN and press mSELECT. 2 Enter the current master PIN when prompted and press mOK to confirm. • The PIN entered will be shown as asterisks (*) on the screen. 3 Enter the new PIN and press mOK.
CD650_IFU_EN_UK.book Page 35 Monday, June 23, 2008 3:42 PM 2 Scroll : to the country of your 8.7 1 2 Unregister a handset Press M in idle mode, scroll : to ADVANC. SETTINGS and press mSELECT, scroll : to UNREGISTER and press mSELECT. Enter the master PIN when prompted and press mOK to confirm. Note By default, the master PIN is 0000. 3 Scroll : to select the handset number to unregister and press mSELECT.
CD650_IFU_EN_UK.book 8.10 Page 36 Monday, June 23, 2008 Default settings Ringer Volume Ringer Melody Earpiece Volume Speaker Volume Wallpaper MEDIUM RING 1 VOLUME 3 Key Beep Contrast Backlight time Auto Hang-up Alarm clock Barring mode Easy call SMS reception Handset Name Date/Time Master PIN XHD sound mode Conference ON LEVEL 2 20s ON OFF OFF OFF ON PHILIPS 01-01; 00:00 0000 ON Note The use of your CD655 cannot be guaranteed with all types of PABX. 1 Press M in idle mode, scroll : 2 8.
CD650_IFU_EN_UK.book Page 37 Monday, June 23, 2008 disconnected after you press r key. It can be set to short, medium or long. The default value of recall time that is preset in your handset should be the best suited for your country network and therefore you should not need to change it. Note This setting is useful when using network services. The use of some services accessed with [r + 1] , [r + 2] (call waiting, call forward...) will depend on your recall time setting.
CD650_IFU_EN_UK.book 9 Page 38 Monday, June 23, 2008 Network Services This menu provides a convenient means for you to access, activate or deactivate some network services that are country/ subscription dependent. Contact your network provider for more information about these services. The default numbers and values that are preset in your phone should be the best suited for your country network and therefore you should not need to change them. 4 9.1.
CD650_IFU_EN_UK.book Page 39 Monday, June 23, 2008 9.2 Voice Mail This feature allows the caller to leave a voice message when you are unable, or do not wish to take a call yourself. The availability of this feature is dependent on your country and your subscription with your network provider. Charges often apply for you to retrieve messages, as these are stored by the network rather than on the handset itself. Contact your network provider for more information about this feature. 9.2.
CD650_IFU_EN_UK.book 9.4.2 Page 40 Monday, June 23, 2008 3:42 PM Activate Cancel Call Back 1 Press M in idle mode, scroll : 2 3 to NETWORK SERVICES and press mSELECT, scroll : to CANCEL CALL BACK and press mSELECT. Press mSELECT to CALL. • The number for that selected service will be dialled. When the number has been dialled, press e to return to idle mode. 9.5 Withhold ID 9.5.
CD650_IFU_EN_UK.book Page 41 Monday, June 23, 2008 3:42 PM 2 Enter the text and press mOK. 10 SMS SMS stands for Short Message Service. To benefit from this service, you must subscribe to Caller Line Identification Service (CLI) together with SMS service from your network provider. SMS messages can be exchanged with a phone (mobile or compatible fixed lines), provided the receiver has also subscribed to CLI and SMS services. The factory settings on your handset correspond to the main national operator.
CD650_IFU_EN_UK.book # Page 42 Monday, June 23, 2008 Long press to switch between upper and lower case. * * Note You can enter up to 160 characters for an SMS. If you receive a call while writing an SMS, the operation will be interrupted. When you go back to SMS editing, the message will be retrieved automatically. 3 Enter the destination phone number and press mOK. Tip You can also press mPHBK, scroll : to select a phone number, press mOK twice. 4 Press mOK to send the message.
CD650_IFU_EN_UK.book DELETE DELETE ALL Page 43 Monday, June 23, 2008 Delete the selected message Delete all messages in the Inbox 10.2.1 Reply to an Inbox message 1 Go to the message content (refer to 2 3 4 steps 1 to 3 in “View Inbox messages” on page 42) and press mOPTION to display the Inbox menu options. Press mSELECT to select REPLY and start editing. After editing, press mOK to confirm the message. To send the message, refer to steps 3 to 4 in “Write and send new SMS” on page 41.
CD650_IFU_EN_UK.book Page 44 Monday, June 23, 2008 3:42 PM 3 DELETE ALL? is displayed on the screen. Press mSELECT again to confirm deletion. 10.3 1 2 3 Save a message in the Draft box After writing the message (refer to steps 1 to 3 in “Write and send new SMS” on page 41), press mOK. Scroll : to SAVE AS DRAFT. Press mOK to confirm. 10.3.2 Edit a Draft message 1 Go to the draft message (refer to 2 3 4 10.3.
CD650_IFU_EN_UK.book Page 45 Monday, June 23, 2008 10.3.5 Delete all Draft messages 1 Go to the draft message (refer to steps 1 to 3 in “Review Draft messages” on page 44) and press mOPTION to display the DRAFTS menu options. 2 Scroll : to DELETE ALL and press mSELECT. 3 DELETE ALL? is displayed on the screen. Press mSELECT again to confirm deletion. 10.4 SMS settings This menu allows you to set up the server for sending and receiving SMS messages. Your phone can receive messages from 3 service centers.
CD650_IFU_EN_UK.book Page 46 Monday, June 23, 2008 3:42 PM 10.4.3 To set outgoing number 1 Press M in idle mode, scroll : 2 3 4 to SMS and press mSELECT, scroll : to SETTINGS and press mSELECT, scroll : to SMS CENTRE and press mSELECT. Scroll : to SMS CENTRE 1, SMS CENTRE 2 or SMS CENTRE 3 and press mOK. Press mSELECT to enter OUTGOING NUMBER. Enter the outgoing number and press mOK to confirm. • A validation tone is emitted. Note The maximum length of an outgoing number is 24 digits. 10.4.
CD650_IFU_EN_UK.
CD650_IFU_EN_UK.book Page 48 Monday, June 23, 2008 3:42 PM 12 Frequently asked questions www.philips.com/support In this chapter, you will find the most frequently asked questions and answers about your phone. Connection The handset does not switch on! • Charge the batteries: Put the handset on the base station to charge. After a few moments, the phone will switch on. The handset does not charge! • Check charger connections.
CD650_IFU_EN_UK.book Page 49 Monday, June 23, 2008 There’s no dialling tone! • No power: Check the connections. • Batteries are empty: Charge the batteries. • Move closer to the base station. • Wrong line cable used: Use the line cable provided. • Line adaptor is required: Connect the line adaptor to the line cord. Caller cannot hear me clearly! • Move closer to the base station. • Move the base station at least one metre away from any electronic appliances.
CD650_IFU_EN_UK.book Page 50 Monday, June 23, 2008 3:42 PM contact your operator should you want to change the settings. Poor audio quality and the antenna icon is blinking! • The indoor and outdoor range of the phone is up to 50 metres and 300 metres respectively. When the handset moves beyond the operation range, the antenna icon will blink. My handset keeps going into idle mode! • If there are no key presses for 30 seconds, the handset will automatically return to idle mode.
CD650_IFU_EN_UK.
CD650_IFU_EN_UK.
Page 45 Monday, June 23, 2008 3:42 PM ENGLISH CD650_IFU_EN_UK.
CD650_IFU_EN_UK.book Page 46 Monday, June 23, 2008 3:42 PM © 2008 Koninklijke Philips Electronics N.V.
