Instructions / Assembly

12
10881
10882
10881
10882
Step 1: Trusses
12AP
You will need for this page:
Washers are to be used on painted parts only. Washers
are not necessary on unpainted parts and there are
not enough to use on every Screw and Bolt.
Build two Assemblies.
Align the Truss Post and Truss Post Insert and
join as shown. Insert Large Screws along both
sides of the Truss Post where holes align.
1
2
Repeat instruction 1 to build a second Truss Post
Assembly. Set aside for use on next page.
With the Upper and Lower Chord Trusses
positioned as shown below, attach Shear Plates
where indicated below. Attach Shear Plates using
Large Screws to Upper Chord fi rst, then to the
Lower Chord.
3
4
Repeat instruction 3 to build a second Chord Truss
Assembly. Set aside for use on next page.
Truss Post Insert fi ts INSIDE
Truss Post as shown.
7003
Left Shear
Plate
4
7004
Right Shear
Plate
4
10881
10882
10883
10884
7003
7003
7004
7004
Build two Assemblies.
(QTY: 40)
LS
Holes must align in this direction.
CORRECT
INCORRECT
Not this direction
10881
Truss Post
2
10882
Truss
Post Insert
2
10883
Upper
Chord Truss
2
10884
Lower
Chord Truss
2