Installation Guide

17
You will need for this page:
Step 3: Continued
17H
Using Small Screws, attach a Front Wall
Panel and Corner Panel to each corner of
the Front Wall as shown. The Corner Panel
should only be secured to the Front Wall Panel where
the Panels overlap. Do not secure the Corner Panel
to the Front Wall itself, this will be done in Step 6. Also,
leave the holes closest to the Door open in the Front
Wall Panel. These will be used to attach the Door
Jambs in Step 6.
6
Slide the Door Header Assembly down onto
the Front Wall Assemblies as shown and
secure with Small Bolts and Nuts. Once these
pieces are joined, take care when moving them as the
Door Header may bend.
5
(QTY: 8)
(QTY: 12)
Assemblies from previous page:
• Left Front Wall Assembly
• Right Front Wall Assembly
• Door Header Assembly
LEAVE HOLE OPEN
LEAVE HOLE OPEN
LEAVE HOLE OPEN
IMPORTANT: A minimum
of two people should be
used at all times when
handling or maneuvering
the Front Wall Assembly.
When installing the Front
Wall Assembly in the build-
ing, two people should hold
the Assembly in place until
it is secure. Failure to do so
could result in bending the
Front Frame and Fascia
pieces.
LEAVE HOLES OPEN
ALONG SIDE OF WALL
10618
Front Wall
Panel
2
10619
Corner Panel
2
Left Front Wall Assembly
Right Front Wall Assembly
SB
SB
SB
SB
SB
SB
SB
SB
10618
10618
10618
10619
10619
10619
SB SS
SS
SS
SS
SS
SS