Instructions / Assembly

28
You will need for this page:
Step 9: Continued
28H
CUT
Tape BOTH Gable joints before installing Roof Beams.
Weather Stripping Tape
Top View of Gables
Tape should wrap around
gap between Gables.
Beam End Views
Side of Beams with small holes must face up.
Seal the gap between the Gables using the
weather stripping tape as shown.
5
6
Secure two Front and Rear Roof Beams
together with a single bolt to form the Main Roof
Beam as shown above. The end of the Main
Roof Beam with the open hole should face the Gable.
7
Position the Front and Rear Roof Beams as
shown below and attach to Gable and Truss
using two Small Bolts and Nuts per side. Install
the Main Beam fi rst.
Leave Hole Open
(QTY: 13)
Roof Beam
4
10649
10649
10649
10649
10649
10649
SB
10’x10’ (3,0 m x 3,1 m)
building shown.