Instructions / Assembly

29
You will need for this page:
Step 9: Continued
29H
Beam Brace
1
9204
Tab end attaches to Roof Beam.
Angled end attaches to Gable.
Attach Brace to Gable then rotate to align with Roof Beam.
(QTY: 2)
Attach Brace to Track Supports and Main Beam.
Attach the Roof Beam Brace to the
Track Support with one Small Bolt
and Nut as shown.
8
9
Rotate to align with Roof Beam and
secure to Roof Beam with one Small
Bolt and Nut as shown. Repeat
Steps 9-2 thru 9-9 to install Gables at the
front of the building. The Gables in the front
of the building are installed exactly as the
Gables in the rear of the building.
9204
Repeat Steps 9-2 thru 9-9 to install
front Gables.
SB
9204
10’x10’ (3,0 m x 3,1 m)
building shown.
R