Instructions / Assembly

21
You will need for this page:
Side Wall
Channel
2
10886
21AP
Carefully position the Rear Wall Assembly
in place at the rear of the building and secure
to Side Frame with one Large Screw per
side as shown.
1
2
Slide one end of the Front and Rear Side
Wall Channel behind the Corner Panel
and secure with a Large Screw. Secure the
other end with a Large Screw when done. Repeat
for the other Front and Rear Side Wall Channel.
(QTY: 4)(QTY: 2)
Assemblies from Step 2:
• Rear Wall Assembly
10886
10886
10886
LS LS
10’x10’ (3,0 m x 3,1 m)
building shown.
If you purchased a Door Kit, skip this page and move on to page 22.
Step 5: Rear Wall Install