Installation Instructions

22
You will need for this page:
Step 6: Front Wall Install
2
Position the Door Jambs as shown
and secure to the Front Wall Panel
using Small Screws. Double check
that the holes in the Door Jamb line up with
the holes in the Wall Post (Hinge). If they
do not, the Left and Right Door Jambs
are most likely switched.
Just as in the rear, carefully position
the Front Wall Assembly as shown
and secure with a Large Screw on
both sides. Install Front and Rear Side
Wall Channels using Large Screws.
1
22H
IMPORTANT: When install-
ing the Front Wall Assembly
in the building, two people
should position and hold
the Assembly in place un-
til it is secure. Failure to do
so could result in bending
the Front Frame and Fascia
pieces.
(QTY: 4)(QTY: 2)
(QTY: 6)
Assemblies from Step 3:
• Front Wall Assembly
Side Wall
Channel
2
10633
10633
10633
LS
LS
LS
LS
LS
LS
LS
Right Door
Jamb
1
10622
Left Door
Jamb
1
80037
10622
80037
LS LS
SS
10’x10’ (3,0 m x 3,1 m)
building shown.
SS
SS
SS