Owners manual

26
Assemblies from Step 2 and Step 3:
• Rear Wall Angle Assembly (1)
• Side Wall Angle Assemblies (2)
• Header Assembly (1)
(QTY: 8)
Wall Angles must face inside the building.
You will need for this page:
Step 10: Wall Framing
• Use two (2) Java Screws to do each of the following:
• Install one Side Wall Angle Assembly fi rst.
• Install the Rear Wall Angle Assembly second, sliding the end under the Side Wall Angle Assembly.
• Install the other Side Wall Angle Assembly third.
• Install the Header Assembly last, sliding each end under the Side Wall Angle Assemblies.
1
Side Wall Angle Assembly
Side Wall Angle Assembly
Rear Wall Angle Assembly
Header Assembly
ATTACH FRAMES TO INSIDE OF WALL PANELS
26W
JS
Header slides under Side Wall Angle Assembly