Owners manual

33
Leave two (2) holes open on each side of
the Gable peak to attach Track Support.
Install Track Support.
You will need for this page:
Step 14: Continued
Working with one Gable at a time,
attach the front Gables to the Header
with Sand Screws. Do not insert
screws into the two (2) holes closest
to the peak of each Gable. These will
be used to attach the Track Support
later.
5
6
To secure Gables together, position
the Gable Brace as shown and
insert a single Sand Bolt and Nut
through the second hole from the
bottom only.
7
Position Track Support as shown. Secure
Track Supports to Gable using one (1) Sand
Bolt and Nut. Secure to Header using two (2)
Sand Screws per side.
(QTY: 2)
Gable Brace
1
9009
Track Sup.
2
(QTY: 18)
33W
SS
SB
Attach Brace with bolt thru
second hole from bottom only.
6228
6228
6228
9009
SB
SB