Owners manual

34
Assemblies from Step 4:
• Double (Main) Roof Beam Assembly (1)
• Single Roof Beam Assemblies (2)
(QTY: 12)
CUT
Tape BOTH Gable joints before installing Roof Beams.
You will need for this page:
Weather Stripping Tape
Top View of Gables
Tape should wrap around gap between Gables.
Step 15: Roof Framing
Beam End Views
Angled side of Beams must face up.
Seal the gap between the Gables
using the Weather Stripping Tape
as shown. Do this at both ends of
the building before installing Roof
Beams.
1
2
Position the Roof Beams as shown
below and install using two (2) Sand
Bolts and Nuts per side. Install the
Main (center) Beam fi rst.
34W
Weather
Stripping
1
67545
SB