Owners manual

37
(QTY: 6)
(QTY: 8)
Right End
2
10700
Left End
2
80053
You will need for this page:
LEAVE THESE HOLES OPEN
FASTEN TO NEXT PANEL
2
1
3
4
5
7
8
LEAVE THIS HOLE OPEN
6
LEAVE THIS HOLE OPEN
Step 16: Roof Corners
Secure the fi rst End Panel in rear of unit to the
Main Roof Beam by placing a Java Screw in
hole #1 (from the diagram below). Carefully
remove the Gable Edge Trim once the Panel
is in position.
1
2
Fasten Panel to Gable by placing Sand Bolts
through holes #2 - #7. Fasten the holes in order.
3
Secure the Panel to the Lower Roof Beam by
placing a Java Screw in hole #8. Repeat for
other rear End Panel.
37W
7
Attach Gable Decor to front Gables and End
Panels using Java Bolts through holes #3,
#4, and #5.
4
Repeat Step 1 for front End Panels.
5
Fasten front End Panels to Gable by placing
Sand Bolts through holes #2, #6, and #7.
Fasten the holes in order.
6
Secure the front End Panel to the Lower
Roof Beam by placing a Java Screw in hole
#8. Repeat for other front End Panel.
JS
JB
1
2
3
4
5
7
8
6
An Awl
may be used
to help align
holes that are only
slightly misaligned.
Take care not to bend or warp
the metal, and always practice
proper tool safety.
80053
80053
10700
10700
(QTY: 18)
SB
66818
Gable Decor
1
Work one corner at a time.
Be sure to fi nish a corner
before moving on to the
next one.
Washer
Bolt
Nut
GABLE