Owners manual

38
Roof Panel
2
7571
Roof Panel
2
7743
Attach Panels #5 - #8 according to the diagram on page 36.
Weather stripping tape should be applied in one
continuous strip along the length of the roof.
You will need for this page:
(QTY: 4)
(QTY: 32)
DO NOT FASTEN AT THIS TIME
FASTEN TO NEXT PANEL WITH BOLT AND NUT
FASTEN TO ROOF BEAMS WITH SCREWS
FASTEN TO RIDGE CAP (NEXT TWO PAGES)
Step 17: Roof Assembly
Begin Weather Stripping the roof ridge.
Apply more of the weather stripping after each
additional Panel is installed.
1
3
Do not fasten the holes on the lower end of the
Panels. Do not install Panels #9 or #10 yet.
Double check that Panels are installed in the
correct position. The part numbers listed in the
Roof Panel Placement diagram on page 36
must match the numbers inked on the Panels.
2
Attach Panels #5 - #8 in the order given in the
diagram on page 36. Use the diagram to the left
while assembling the roof.
7571
7571
7743
7743
38W
JS JB
1
3
2
67545
Weather
Stripping
1