Installation Guide

ManualsBrandsArrow ManualsStorage & Organization4 ft. x 2 ft. Designer Metro Series Metal Shed

6

14

14M

You will need for this page:

10701

Rear

Corner

Panel

2

(QTY: 12)

SS

Support the Corner Panels until

Wall Angles are installed.

Leg of Rear Wall Angle with six

holes facing up.

Assemblies from Step 2:

• Front Right Corner Assembly

• Front Left Corner Assembly

(QTY: 8)

JS

10726

1073110732

10729

Rear Wall

Angle

1

10731

2

Side Wall

Angle

10732

Front Header

1

JS

JS

JS

JS

Front Left Corner

Assembly

Front Right Corner

Assembly

10701

10701

10732

10731

10729 10731

1

2

3

4

5

Attach the Rear Corner Panels to the Floor Frame

using two (2) Sand Screws for each Panel.

1

Attach the Rear Wall Angle to the Rear Corner

Panels using one (1) Sand Screw in each Panel.

2

Attach the Front Corner Assemblies to the Floor

Frame using one (1) Sand Screw on the side of the

building and two (2) Java Screws on the front of the

building for each assembly as shown.

3

Attach the Side Wall Angles to the

Rear and Front Corner Panels

using one (1) Sand Screw in each

Panel. Side Wall Angles overlap

Rear Wall Angle in corners.

4

Place the Front Header on top

of the Door Jambs, under the

Side Wall Angles in the corners.

Secure Front Header with two (2)

Java Screws at the top of each

Door Jamb as shown.

5

Wall Angles must face inside the building.

10729

10701

10731

Header slides under Side Wall Angle

Step 3: Wall Framing