Installation Guide

6
Step 4: Continued
16
16M
You will need for this page:
Continue until ALL Wall Panels
have been installed.
Place bolt through center hole where Panels overlap.
Working one side at a time, lift the Panels into place and
secure top and bottom of Panels with Sand Screws.
2
3
Place one (1) Sand Bolt and Nut through the center hole of
the Panel where Panels overlap, as shown.
(QTY: 46)
SS
(QTY: 7)
SB
3
Corner Panel
Corner Panels lay over
Back and Side Panels.