Installation Guide

6
Step 6: Continued
19
19M
You will need for this page:
(QTY: 2)
SB
Working one (1) Gable at a time, attach the
Front Gables to the Header with six (6) Sand
Screws as shown.
3
To secure Left and Right Gables together,
position the Gable Brace as shown to the right
and insert a single Sand Bolt and Nut through
the second hole from the bottom only. Repeat
this for the other set of Gables.
4
10733
Gable Brace
2
67293
Weather
Stripping
1
Gable must fi t UNDER Side Wall Angle at corner.
Attach Brace with Bolt thru
second hole from bottom only.
10733
SB
10734
10735
CUT
Tape BOTH Gable joints before installing Roof Beams.
Weather Stripping Tape
Top View of Gables
Tape should wrap around
gap between Gables.
Seal the gap between the Gables using the
Weather Stripping Tape as shown. Do this for
both set of Gables.
5
10735
1
Left Gable
10734
Right Gable
1
(QTY:6)
SS
10734
10735