Installation Guide

6
Roof Install Prep Page
21
21M
At this time, measure diagonally to ensure the building is
square. The building should be square at the base and at
the top. This will make Roof Panels fi t better and holes
will better align.
Be sure to carefully follow the Roof Panel
Placement Order Diagram on this page.
Read through all of Step 7 before beginning Roof Assembly.
Whenever a crimped rib and an uncrimped rib meet,
place the crimped rib UNDER the uncrimped rib.
Crimped Rib
Uncrimped Rib
The building is square when diagonal
measurements are equal.
8006110730
4 3
FRONT
10730
10727
80061
10728
2 1
Roof Panel Placement Order
13
4
5
2
6
FASTEN TO WALL ANGLE WITH SCREWS
FASTEN TO RIDGE CAP
FASTEN TO NEXT PANEL WITH SCREWS
FASTEN TO ROOF BEAMS WITH SCREWS
DO NOT FOCUS
WEIGHT ON ROOF.