Owners manual

6
Step 3: Corners and Wall Channel
14
14M
You will need for this page:
Attach the Rear Corner Panels to the Floor Frame
using two (2) Sand Screws for each Panel.
1
10701
Rear
Corner
Panel
2
10739
1
Rear Wall
Channel
10740
Side Wall
Channel
2
Washers are to be used
on painted parts only.
Washers are not necessary
on unpainted parts and
there are not enough to use
on every Screw and Bolt.
10740
10701
Attach the Rear Wall Channel to the Rear Corner
Panels using one (1) Sand Screw in each Panel.
2
(QTY: 12)
SS
Attach the Front Corner
Assemblies to the Floor Frame
using one (1) Sand Screw on
the side of the building and two
(2) Java Screws on the front of
the building for each assembly as
shown.
3
(QTY: 2)
SS
10701
10701
Front Left Corner
Assembly
10740
10740
10739
Attach the Side Wall Channels
to the Rear and Front Corner
Panels using one (1) Sand Screw
in each Panel. Attach the Side
Wall Channel to the Rear Wall
Channel on the inside of the shed
with one (1) Sand Screw in each
Rear Corner.
4
Support the Corner Panels until
Wall Channels are installed.
Front Right Corner
Assembly
Assemblies from Step 2:
• Front Right Corner Assembly
• Front Left Corner Assembly
(QTY: 4)
JS
JS
JS
1
3
2
4
4