Owners manual

6
Step 4: Walls
15
15M
You will need for this page:
10725
Wall Panel
4
(QTY: 46)
SS
(QTY: 7)
SB
Crimped Rib
Uncrimped Rib
Whenever a crimped rib and an uncrimped
rib meet, the crimped rib should be placed
UNDER the uncrimped rib if possible.
SB
SS
SS
SS
SB
Continue until ALL Wall Panels
have been installed.
Place Sand Bolt where panels overlap at mid-wall.
SS
1
2
3
Crimped Rib Faces front of
building on side panels.
JB
JB
(QTY: 2)
JB
Corner Panels lay over Side and Rear Panels.
Corner Panel
4
4
Working one (1) side at a time, lift a
Wall Panel into place and secure to the
middle Wall Channel with four (4) Sand
Screws, and Sand Bolts and Nuts
where ribs overlap, as shown. Be sure to
have ribs placed correctly.
1
Secure the Panels using four (4) Sand
Screws per Panel to the Floor Channel
and Sand Screws where ribs overlap,
as shown.
2
Secure Panels at the top where ribs
overlap using Sand Screws.
3
Put one (1) Java Bolt through empty
hole in middle of each Door Jamb.
4