Owners manual

6
Step 9: Door Assembly
24
24M
You will need for this page:
10718
Horizontal
Door Brace
2
10719
1
Door Handle
Brace
10782
Door Panel
1
10718
10719
10718
10782
(QTY: 12)
SS
10720
Diagonal Door
Brace
4
(QTY: 1)
TS
67236
Adhesive Pad
1
10719
10782
67236
TS
Diagonal Door Braces attach from
behind Horizontal Door Brace.
10720
10720
10720
10720
10720
10718
Large holes of Diagonal
Door Braces go to center.
Start assembly by sliding the Door Handle
Brace into the middle of the Door and securing
it with four (4) Sand Screws. Then attach the
Horizontal Door Braces to each end of Door
using two (2) Sand Screws on each brace.
Once installed, attach Adhesive Pad between
leg of Door Handle Brace and Door.
1
Place the ends of Diagonal Door Braces
with small holes under Horizontal Door
Braces as shown. Secure all Diagonal Door
Braces to center of Door Handle Brace
using one (1) Tapping Screw. Attach all
Diagonal Door Braces under Horizontal
Door Braces using four (4) Sand Screws at
each corner as shown.
2
Make sure holes in Door Handle Brace
are on same side as holes in Door.