Installation Guide

6
Step 6: Continued
21
21AC
You will need for this page:
7
Position the Roof Beams at the top of
Gables as shown and attach using two (2)
Sand Bolts and Nuts on each side of Roof
Beams.
6
Place two (2) Roof Beams back-to-back
with small holes on top. Fasten together
using two (2) Sand Bolts and Nuts.
Attach the angled end of Roof Beam Brace
to the Gable with one (1) Sand Bolt and
Nut as shown.
8
9
Rotate to align with Roof Beam and secure
to Roof Beam with one (1) Sand Bolt and
Nut as shown. Repeat for opposite side.
Roof Beam
Brace
2
9204
10805
Roof Beam
2
(QTY: 10)
SB
7
Attach Brace to Gable then
rotate to align with Roof Beam.
8
Attach Brace to lowest hole in Gable and Main Roof Beam.
Tab on Roof Beam Bracket mounts
between Main Roof Beam.
9204
9
SB
10734
10735
10805
6