Use and Care Manual

6
Step 1
6
06V
You will need for this page:
Attach the Bottom Air Spring Pedestal to the Back Panel by using Screws
provided with Bottom Air Spring Pedestal. Push Bottom Air Spring Pedestal
downward and tighten Screws as shown in Figure A.
1
Put three (3) Hardware II on the bottom of Back Panel as shown in Figure C.
3
Attach four (4) Corner Supports to Back Panel using eight (8) Hardware BB as
shown in Figure B. DO NOT TIGHTEN SCREWS.
2
• Back Panel - C
(QTY:1)
• Bottom Air Spring Pedestal - HH
(QTY: 2)
• Corner Support - H
(QTY: 4)
(QTY: 3)
II
C
Fig. A
HH
Fig. C
II
(QTY: 8)
BB
Fig. B
H
BB
HH