Use and Care Manual

07V

You will need for this page:

Step 2

• Front Panel - B

(QTY: 1)

• Plastic Handle - G

(QTY: 1)

• Corner Support - H

(QTY: 4)

Install the Plastic Handle on the Front Panel using four (4) Hardware DD and

four (4) Hardware EE as shown in Figure D.

Fig. D

Put three (3) Hardware II on the bottom of Front Panel as shown in Figure F.

Attach four (4) Corner Supports to Front Panel using eight (8) Hardware BB

as shown in Figure E. DO NOT TIGHTEN SCREWS.

Fig. E

Fig. F

(QTY: 3)

(QTY: 8)