User guide

© GeoWise Ltd. 2011
Page 38
visualise | communicate | ENGAGE The InstantAtlas Desktop Publisher
g the InstantAtlas Area Profile Template User Guide
© GeoWise Ltd. 2013
The final screen of the Publisher also gives you the option to save the
Publisher settings you have made during the publishing process into an
InstantAtlas project file (Figure 54). If you need to produce the same report
again or wish to publish a very similar report at a later stage you can load
this project file into the Publisher via the menu option ‘File’ – ‘Open
Project...’.This will apply the same settings again.
Figure 54
If you have finished publishing, click the ‘Exit’ button to close the Publisher.
If you wish to publish another report, click the ‘Restart’ button to return to
the ‘Choose a Template’ screen. Alternatively, click the ‘Back’ button to
return to the ‘Choose Your Output Folder’ screen.
B.4. Publisher Configuration File
The location of the Publisher configuration file will depend upon your
operating system.
With Vista it is here:
C:\ProgramData\GeoWise\InstantAtlas
With XP it is here:
C:\Documents and Settings\All Users\Application Data\GeoWise\
InstantAtlas
You can open this file with a text editor such as Notepad (see Figure 55).
Figure 55
B.4.1. Changing the Interface Language of the IA Tools
You can add a new setting to control the language for the interfaces of the
InstantAtlas tools (Publisher, Designer and Style Editor). The default for
this is UK English. To make the software use a language pack, you must
add one of the settings show in the table below on a new line below [gui]:
Setting
Language you wish to run the software in…
locale=en_US
US English
locale=de
German
locale=es
Spanish
locale=fr
French
If you would like the interfaces to display in Spanish for example, your
iap.ini file should look like that shown in Figure 56.