User guide

© GeoWise Ltd. 2011
Page 78
visualise | communicate | ENGAGE The InstantAtlas Designer
g the InstantAtlas Area Profile Template User Guide
© GeoWise Ltd. 2013
Figure 91
Click the ‘Add’ button to add a colour. To remove a colour, click its cell in
the ‘Index’ column to highlight it and click the ‘Remove’ button. To move a
colour up or down in the order, click its cell in the ‘Index’ column to
highlight it and then click the ‘Up’ or ‘Down’ button. If you add a colour, or
click an existing colour, the ‘Pick a colour’ dialog will appear (Figure 92).
You can use the options under any of the tabs to choose your colour.
Figure 92
Click ‘OK’ when you are satisfied with your choice. Click ‘Cancel’ if you
wish to discard you changes and close the dialog or ‘Reset’ if you wish to
return to the original colour.
InstantAtlas reports will shade the map by interpolating between the first
and last colours in the active palette if the number of classes displayed in
the report exceeds the number of colours in the palette colour array.
Click the ‘Colour Schemes (textual data)’ tab to view the existing colour
schemes (Figure 93). You can add and remove colour schemes and
colours in exactly the same way as for palettes.
Figure 93
C.4.5. Making a Component a Pop-up Window
All components in the report can either be permanently visible or work as a
pop-up window which can be toggled on and off using a button. This
section will describe the steps to modify a component to be a pop-up
window. The bar chart of a Flash dynamic report will be used as an
example.