Use and Care Manual

23
You will need for this page:
Step 10: Wall Framing
23AI
(QTY: 8)
SS
10852
Side
Wall Angle
2
Wall Angles must face inside the building.
5986
10852
10852
5986
10701
Install Rear Wall Angle Assembly to Rear Corner Panels using two (2) Sand Screws as shown.
1
2
Install the Header Assembly using two (2) Sand Screws.
Install both Side Wall Angles to Corner Panels using two (2) Sand Screws per Side Wall
Angle, sliding the front end inside of the Front Header and the rear end under the Rear Wall
Angle as shown.
3
10852
10852
ATTACH FRAMES TO INSIDE OF WALL PANELS
10852
10708
10701
Assemblies from Step 2 and Step 3:
• Rear Wall Angle Assembly (1)
• Header Assembly (1)
Rear Wall Angle Assembly
Header Assembly
Front