Use and Care Manual

27
You will need for this page:
Insert screw where
Channels meet.
Step 13: Wall Channels
Install Rear Wall Channel Assembly by
placing Sand Screws through all remaining
holes in Rear Wall Panels.
1
3
Insert a Sand Screw in both rear corners
where Side and Rear Wall Channels meet.
2
Install Side Wall Channel by placing Sand
Screws through all remaining holes in Side
Wall Panels.
Install Channels on inside of building.
27AI
(QTY: 44)
SS
(QTY: 2)
SS
Front Wall
Channel
2
10709
Side Wall
Channel
2
10854
1
3
Assemblies from Step 2:
• Rear Wall Channel Assembly (1)
Rear Wall Channel Assembly
4
Install Front Wall Channels by placing
Screws through all remaining holes in Wall
Panels and Door Jambs. Be sure to use
Meadow Green Screws on Door Jambs.
4
10854
10709
10709
(QTY: 4)
MGS
MGS
MGS
2