Installation Guide

19
Always attach Wall Panels to Floor Frames with Screws
as shown. Rest Panel on Floor Frame, aligning holes in
the Panel and Floor Frame.
(QTY: 6)
Use one person to support the Corner while
another secures the Panels. Do not leave the
Corner unsupported until it is secure.
Be cautious when maneuvering
and placing Panels. Once Panels
begin to go up it is important to be
able to fi nish in a timely manner
to reduce the possibility of wind
damage to your building.
You will need for this page:
Step 6: Corner Panels
19AB
10701
Rear
Corner
Panel
2
SS
Assemblies from Step 1:
• Front Right Corner Assembly
• Front Left Corner Assembly
Attach the Rear Corner Panels to
the Floor Frame using two (2) Sand
Screws for each Panel.
(QTY: 4)
MGS
Attach the Front Corner Assemblies
to the Floor Frame using one (1) Sand
Screw on the side of the building and
two (2) Meadow Green Screws on the
front of the building for each assembly
as shown.
Front
10701
10701
1
2
MGS
MGS
Front Left Corner
Assembly
Front Right Corner
Assembly
2
1
80057
10716