Use and Care Manual
20
You will need for this page:
Step 7: Wall Framing
20AB
(QTY: 6)
SS
10851
Rear
Wall Angle
1
10852
Side
Wall Angle
2
Wall Angles must face inside the building.
10851
10852
10852
10851
10701
Install Rear Wall Angle to Rear Corner Panels using two (2)
Sand Screws as shown.
1
10841
Front Header
1
(QTY: 4)
MGS
2
Install the Front Header using four (4) Meadow Green Screws.
Install both Side Wall Angles to Corner Panels using two (2) Sand Screws per Side Wall
Angle, sliding the front end inside of the Front Header and the rear end under the Rear Wall
Angle as shown.
3
10852
10852
10851
ATTACH FRAMES TO INSIDE OF WALL PANELS
10841
10852
10841
10839
MGS
MGS