Use and Care Manual

33
You will need for this page:
Step 13: Continued
33AB
Attach Panels #3 and #4 in order given in
the diagram on page 31. Use the diagram to
the right while assembling the roof.
4
10837
An Awl may be used to
help align holes that are only
slightly misaligned. Take care
not to bend or warp the metal, and
always practice proper tool safety.
(QTY: 2)
(QTY: 18)
Work one (1) Panel at a time. Be sure
to fi nish a Panel before moving on to
the next.
2
Roof Panel
FRONT
10837
10837
SS
SB
FASTEN TO REAR WALL ANGLE WITH SCREWS
FASTEN TO NEXT PANEL WITH BOLT AND NUT
FASTEN TO HEADER WITH SCREWS
LEAVE HOLES OPEN
FASTEN TO ROOF BEAM WITH SCREWS
LEAVE HOLES OPEN
Roof Panel ribs align with rear Wall
Panel ribs.