Use and Care Manual

25
(QTY: 13)
(QTY: 90)
Attach Wall Panels with screws through all holes in top and bottom of Panels.
You will need for this page:
Step 11: Continued
Working one side at a time, lift the Panels into
place and secure top and bottom of Panels with
Sand Screws.
2
3
Place one (1) Sand Bolt and Nut through the
center hole of the Panel where Panels overlap,
as shown.
25AH
SS
SB
3
2
Place bolt through center hole
where Panels overlap.
Place back Wall Panels
as shown.
Smaller Rib
Spacing
6155
6155
10725
SB
Corner Panel
Corner Panels lay
over Wall Panels.
4
Leave the holes in Front Wall Panel open as
shown below.
Leave holes open
4
10725