01CS 722750817 Owner’s Manual & Assembly Guide Model No. EZ10872HVCR EZ10872HVCRCC EZ10872HVCC EZ10872HVCCCR Gloves must be worn at all times to reduce risk of injury! www.arrowsheds.com EZ10872HVCREU EZ10872HVCRCCEU EZ10872HVCCEU EZ10872HVCCCREU 10’ x 8’ Nominal Size EZEE SHED Customer Service: 1-800-851-1085 or assist@arrowsheds.com How-to-Assemble Video http://www.shelterlogic.com/ezee BUILDING DIMENSIONS Approx.† Size 10’ x 8’ 3,0 m x 2,4 m Storage Area 71 Sq. Ft. 502 Cu. Ft.
GB: Assembly manual in additional languages available online. Scan QR code below to access. FR: Manuel de montage disponible en ligne dans d’autres langues. Pour y accéder, scannez le code QR ci-dessous. SP: Manual de montaje en idiomas adicionales disponible online. Escanee el código QR a continuación para acceder. DE: Montageanleitung in zusätzlichen Sprachen online verfügbar. Scannen Sie den QR-Code unten, um darauf zuzugreifen. IT: Manuale dell’assemblea in altre lingue disponibile online.
SAFETY PRECAUTIONS... 02BA Safety precautions MUST be followed at all times throughout the construction of your building! Practice caution with the tools being used in the assembly of this building. Be especially familiar with the operation of all power tools. Care must be taken when handling various pieces of your building since many contain sharp edges. Please wear work gloves, eye protection and long sleeves when assembling or performing any maintenance on your building.
ASSEMBLY TIPS & TOOLS 03A Watch the Weather Closely: Be sure the day you choose to install your building is dry and calm. Do NOT attempt to assemble your building on a windy day. Be careful on wet or muddy ground. Use Teamwork: Two or more people are required to assemble your building. One person can hold the parts or panels in place while the other person fastens them together and handles the tools. This makes the process of assembling your building faster and safer.
04BA FREQUENTLY ASKED QUESTIONS Q. How long will it take to assemble the building? A. Assembly time depends on a variety of factors, including roof design, tools available, DIY skill and the pace at which you work. Guidelines for each shed assembly are approximate AFTER completion of the base, and assume two or more people working on the assembly. Generally, you should plan on at least one day working with someone who can assist you; again, after constructing the base.
05BA Q. What kind of base do I use? A. You can: •Pour a concrete slab •Build a wood deck/floor (use exterior-grade plywood) •Use patio blocks •Build on crushed gravel, dirt or grass If you are building a wood deck/floor, an Arrow floor frame kit on top of your deck/floor assembles in minutes and provides a floor frame suitable for a 5/8” exterior-grade plywood floor (not included). A continuous unbroken plastic vapor barrier with a thickness of 6 mil.
06BA PANEL & CHANNEL ASSEMBLY TIPS PANEL 1. Recommend a large table or sawhorses with plywood for working surface. 2. Corners will need to hang off of work surface, so an elevated flat surface is important. 3. Arrows always point up, and always get covered. 4. Start from middle and work your way out to push together panels. 5. Panels can be pulled apart if not aligned properly. Once channels are applied, the wall assembly will be “final”. CHANNEL 6. Work from one end and angle the channel.
CARE & MAINTENANCE... 07BA Exterior Care: For a long lasting finish, clean and wax the exterior surface. We recommend washing with a mild soap solution. DO NOT use power washing to clean your shed. Using a spray automotive type wax periodically on the exterior is highly recommended if you are in a high humidity or coastal climate region. Combustibles and corrosives must be stored in air tight containers designed for chemical and/or combustible storage.
HARDWARE LIST... 08CS Hardware Views by Key No. Key Part No. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 65923 65103 65004 66646 66715 66718 66720 60H 66860 66847 66719 66713 66721 10280 66866 Part Description Qty.
PARTS LIST... Key Part No. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 11035 11034 10275 11017 11027 11024 10288 10336 11033 11037 10340 11038 11040 11030 10337 11039 11022 11041 11008 11009 11032 10999 11000 10998 11036 80123 11014 80121 11015 11019 10341 11026 11025 11031 11004 11002 11028 Part Description Qty.
ASSEMBLY BY KEY NO.
ASSEMBLY BY KEY NO.
ASSEMBLY OVERVIEW 12CS 1 2 3 4 5 6 12
ASSEMBLY OVERVIEW 13CS 7 8 9 10 13
CONSTRUCTING A BASE... 14CS OPTION 1: Directly on ground (earth) Assemble your building directly on level ground (grass, dirt, rock, sand, etc.). OPTION 2: Wood Platform If you decide to build your own base, be sure to select the appropriate materials.
Step 1: Side Walls (2X) You will need for this page: (QTY: 4) (QTY: 4) 10341 4 10340 4 Wall Channel Floor Channel 11019 4 Channel Splice 10341 11019 10341 10341 11019 10341 11019 11019 12" m 5c 30, 10341 10341 Wall Channel Assemblies (Painted) 10340 11019 10340 10340 11019 10340 11019 11019 10340 10340 Floor Channel Assemblies (Unpainted) 15 12" m 5c 30, 15CS
Step 1: Side Walls (2X) You will need for this page: 10998 12 Panel Wall A 10999 2 Panel Wall 10998 11000 2 A Corner Panel 10998 10998 2 10998 1 10998 A 10999 16 10998 10998 10999 11000 16CS
Step 1: Side Walls (2X) You will need for this page: A (QTY: 8) A 10999 A A A 17 11000 17CS
Step 1: Side Walls (2X) You will need for this page: 2 A Wall Channel Assembly IMPORTANT START ASSEMBLY AT CORNER PANEL Channel WALL CHANNEL ASSEMBLY (Painted) A Channel 18 CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL 18CS
Step 1: Side Walls (2X) You will need for this page: 2 Floor Channel Assembly 10280 4 A 19CS IMPORTANT START ASSEMBLY AT CORNER PANEL CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL Corner Clip Channel 11000 10280 A 10280 FLOOR CHANNEL ASSEMBLY (UNPAINTED) 10280 Channel BE SURE TO MAKE TWO (2) SIDE WALL SECTIONS.
Step 2: Rear Wall You will need for this page: (QTY: 2) (QTY: 2) 11037 2 11035 2 Wall Channel Floor Channel 11019 19CD 1 Channel Splice 11028 1 Channel Splice 11037 11028 11037 11028 35" m 88,9 c 11028 11037 11037 11037 Wall Channel Assembly (Painted) 11035 11019 11035 11019 " 12 cm 5 , 30 11035 11019 11035 11035 Floor Channel Assembly (Unpainted) 20
Step 2: Rear Wall You will need for this page: (QTY: 4) A 10998 10998 8 10999 Panel Wall Panel Wall 10998 10998 1 10998 11000 1 21CS A Corner Panel 10998 A A 21 10998 10998 10998 10999 11000
Step 2: Rear Wall IMPORTANT You will need for this page: 1 A Wall Channel Assembly START ASSEMBLY AT CORNER PANEL Channel WALL CHANNEL ASSEMBLY (Painted) A Channel 22 CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL 22CS
Step 2: Rear Wall You will need for this page: 1 Floor Channel Assembly 10280 2 A 23CS IMPORTANT START ASSEMBLY AT CORNER PANEL CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL Corner Clip Channel 11000 10280 A 10280 FLOOR CHANNEL ASSEMBLY (UNPAINTED) 10280 Channel 23
Step 3: Front Wall You will need for this page: 11037 2 (QTY: 2) Wall Channel 1 11028 23CD 11033 1 Channel Splice Header Trim 11037 11037 11028 11037 11028 11037 11028 35" m 88,9 c 11037 11028 11028 11037 11037 11037 11028 11033 11033 Wall Channel Assembly (Painted) 11037 24
Step 3: Front Wall You will need for this page: 11035 2 (QTY: 4) Floor Channel 1 11019 Channel Splice 24CD 11034 1 Ramp 11035 11019 11035 11035 11019 11035 30 12 ,5 " cm 11019 11035 11019 11019 11035 11035 11035 11019 11035 11034 11034 Floor Channel Assembly (Unpainted) 25
Step 3: Front Wall You will need for this page: 11024 (QTY: 6) (QTY: 2) 2 Door Jamb 10998 2 Panel Wall 26CS 11004 2 11000 1 Corner Panel Panel Wall A 11024 11024 10998 10998 11004 RIGHT 11004 LEFT RIGHT 11000 A RIGHT A 26
Step 3: Front Wall You will need for this page: (QTY: 4) 1 1 Wall Channel Assembly Floor Channel Assembly 10280 2 27CS IMPORTANT START ASSEMBLY AT CORNER PANEL Channel CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL Corner Clip A (QTY: 4) WALL CHANNEL ASSEMBLY (Painted) 10280 RIGHT A 10280 LEFT FLOOR CHANNEL ASSEMBLY (UNPAINTED) IMPORTANT Channel START ASSEMBLY AT CORNER PANEL CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL Channel 11000 A 27
Step 4: Right Door Assy You will need for this page: 11017 (QTY: 4) (QTY: 4) 1 Vertical Door Brace 11026 1 Vertical Door Brace 11025 1 Door Astragal 66715 1 66721 6 U-Nut (Door Clip) Door Handle 66866 2 Door Closure Clip 66721 (2X) 66721 (2X) 11017 66721 (2X) 11025 66866 66715 11026 66866 11025 11026 66715 28 66866 66866 26BO
Step 4: Right Door Assy You will need for this page: 1 11002 (QTY: 4) Door Panel 1 11009 11008 Door Panel 1 Door Panel 10275 2 Horizontal Door Brace 2 Vertical Door Brace Assy 11008 11009 11002 10275 11002 11009 11008 10275 11002 11009 29 11008 28CD
Step 4: Right Door Assy You will need for this page: (QTY: 9) (QTY: 3) 10288 2 Diagonal Door Brace 10288 BACK 10288 FRONT THIS END UP WHEN HANGING DOOR 30 30CS
Step 5: Left Door Assy You will need for this page: 11017 (QTY: 2) 1 Vertical Door Brace 11027 1 Vertical Door Brace 66721 6 U-Nut (Door Clip) 66716 1 Padlock Eyelet 66721 (2X) 66721 (2X) 11017 66721 (2X) 11027 66716 66716 11027 31 29BO
Step 5: Left Door Assy You will need for this page: 11002 (QTY: 4) 1 11009 Door Panel Door Panel 1 1 11008 Door Panel 10275 2 Horizontal Door Brace 31CD 2 Vertical Door Brace Assy 11008 11002 11009 10275 11002 11009 11008 10275 11002 11009 32 11008
Step 5: Left Door Assy You will need for this page: (QTY: 9) (QTY: 7) 10288 2 66719 Diagonal Door Brace Spring Pin Upper 1 66713 Spring Pin Lower 66719 10288 BACK 10288 66713 THIS END UP WHEN HANGING DOOR FRONT 33 1 33CS
Step 6: Roof pre-assy You will need for this page: (QTY: 8) 10336 4 10337 4 Roof Channel Roof Channel 11019 4 Channel Splice 10337 11019 10336 10337 11019 10336 10337 11019 10336 10337 11019 10336 11019 11019 10337 10336 34 12" m 5c 30, 34CS
Step 6: Roof pre-assy (2X) 35CS You will need for this page: 11038 4 (QTY: 16) Roof Beam 11038 Overlap Length 6” (15,2 cm) 11038 11038 11038 92 3/4” (235,6 cm) Finished Length 35
Step 6: Roof pre-assy (2X) 36CS You will need for this page: 80121 2 11014 12 11015 Roof Panel Roof Panel Right Roof Panel Left (QTY: 8) 80121 11014 11014 2 4 Roof Channel Assembly 11014 11014 11014 11039 4 Fascia Trim 11014 11015 ROOF CHANNEL ASSEMBLY (Painted) 11015 LARGE HOLES IN CHANNELS FACE DOWN 80121 ROOF CHANNEL ASSEMBLY (Painted) Channel 11039 11015 11039 80121 36
Step 6: Roof pre-assy (2X) 37CS You will need for this page: 2 11022 1 11032 1 Roof Beam Assembly (QTY: 14) Ridge Cap Ridge Cap 11015 80121 Large holes face down SIDE VIEW ROOF BEAM ASSEMBLY 11032 11022 11015 80121 RIGHT 37 Large holes face down
Step 7: Wall Assembly You will need for this page: 1 Side Wall Assembly (QTY: 4) 1 Rear Wall Assembly A CORNER PANEL ON TOP OF WALL PANEL 1 Corner Clip Corner Panel Wall Panel 38CS A 2 B B 1 SIDE WALL ASSEMBLY 2 38 REAR WALL ASSEMBLY
Step 7: Wall Assembly 39CS You will need for this page: 1 Side Wall Assembly 1 Front Wall Assembly D 1 CORNER PANEL ON TOP OF WALL PANEL Corner Clip Corner Panel 2 Wall Panel D D D C 1 C C FRONT WALL ASSEMBLY 2 39 C SIDE WALL ASSEMBLY
Step 7: Wall Assembly You will need for this page: (QTY: 12) 40 40CS
Step 8: Gable & Beam Assy You will need for this page: (QTY: 16) (QTY: 14) 11038 4 Roof Beam 11036 2 Gable Right 80123 2 Gable Left 11031 1 Header Angle 11038 1 11038 2 11038 Overlap Length 6” (15,2 cm) 11038 92 3/4” (235,6 cm) Finished Length BACK 11036 80123 11036 or 80123 FRONT SIDE VIEW 11036 80123 11031 BACK 41 41CS
Step 8: Gable & Beam Assy You will need for this page: (QTY: 12) 11030 2 (QTY: 8) Gable Brace 11040 4 42CS 1 Roof Beam Bracket Roof Beam Assembly 11040 11030 11030 BACK 11040 OPEN HOLES 11030 11040 11040 11040 FRONT FRONT BACK BACK FRONT 42
Step 9: Roof Assembly You will need for this page: 1 (QTY: 8) Roof Assembly BACK LEFT Large holes face down FRONT FRONT LEFT INSIDE OF BUILDING BACK 43 43CS
Step 9: Roof Assembly You will need for this page: 1 66860 2 Roof Assembly (QTY: 32) 44CS BACK Peak Cap (QTY: 8) RIGHT FRONT Large holes face down FRONT RIGHT INSIDE OF BUILDING 8 23 25 27 7 28 26 6 31 BACK 24 5 29,30 2 3 4 1 13 32 66860 14 15 9 10 66860 11022 11 12 FRONT 44 18 20 22 21 19 17 16
Step 9: Roof Assembly You will need for this page: 4 60H (QTY: 8) (QTY: 12) 45CS 66847 4 Corner Cap Vent 66847 60H 66847 60H 60H 66847 60H 66847 FRONT FRONT BACK BACK INSIDE OF BUILDING 45 (4X)
Step 9: Roof Assembly You will need for this page: 11041 2 Roof Beam Brace (QTY: 12) 11051 46CS 4 Roof Beam Brace FRONT 11051 FRONT 11040 11030 (4X) 11041 (2X) BACK 11041 FRONT 11051 INSIDE OF BUILDING 46
Step 10: Door Assembly You will need for this page: 66718 6 (QTY: 12 11053 2 INSIDE OF BUILDING Door Jamb Support Hinge 11024 11053 66718 INSIDE OF BUILDING 11053 11024 66718 66718 11053 11053 FRONT 66718 47 47CS
Step 10: Door Assembly You will need for this page: 1 (QTY: 14) Right Door Assembly 1 Left Door Assembly FRONT 48 48CS
ARROW ACCESSORIES... 49CS ANCHOR KITS Model No. AK4 Anchor Kit contains heavy-duty steel augers, 60' (18 m) of steel cable and 4 cable clamps. No digging or concrete pouring, just insert cable under roof, over roof beams, into augers and twist augers into the ground. For buildings larger than 10'x9' (3,0 m x 2,6 m), use 2 kits. FLOOR FRAME KITS MODELS FKEZEE A simple floor frame system made of heavy-duty, hot-dipped galvanized steel. Use as base for plywood, sand or stone. See Page. 50 Model No.
ANCHORING OPTIONS... 39BA IMPORTANT: It is important that building be anchored after construction. These are recommended ways of anchoring. Anchor into Wood or Concrete Arrow Anchoring Kit: (Model No. AK100) For wood platform. Use Decking Screws. For concrete slab. Use Lag Screws. Recommended for use with the concrete base. Contains: Corner gussets, perimeter clips, hardware, 1/4" masonry drill bit and installation instructions. Arrow Anchoring Kit: (Model No.
ASSEMBLY NOTES 51 46A