01CR 722660717 Owner’s Manual & Assembly Guide Model No. EZ8772HVCR EZ8772HVCRCC EZ8772HVCC EZ8772HVCCCR Gloves must be worn at all times to reduce risk of injury! www.arrowsheds.com EZ8772HVCREU EZ8772HVCRCCEU EZ8772HVCCEU EZ8772HVCCCREU 8’ x 7’ Nominal Size EZEE SHED Customer Service: 1-800-851-1085 or assist@arrowsheds.com How-to-Assemble Video http://www.shelterlogic.com/ezee BUILDING DIMENSIONS Approx.† Size 8’ x 7’ 2,4 m x 2,1 m Storage Area 49 Sq. Ft. 329 Cu. Ft.
GB: Assembly manual in additional languages available online. Scan QR code below to access. FR: Manuel de montage disponible en ligne dans d’autres langues. Pour y accéder, scannez le code QR ci-dessous. SP: Manual de montaje en idiomas adicionales disponible online. Escanee el código QR a continuación para acceder. DE: Montageanleitung in zusätzlichen Sprachen online verfügbar. Scannen Sie den QR-Code unten, um darauf zuzugreifen. IT: Manuale dell’assemblea in altre lingue disponibile online.
SAFETY PRECAUTIONS... 02BA Safety precautions MUST be followed at all times throughout the construction of your building! Practice caution with the tools being used in the assembly of this building. Be especially familiar with the operation of all power tools. Care must be taken when handling various pieces of your building since many contain sharp edges. Please wear work gloves, eye protection and long sleeves when assembling or performing any maintenance on your building.
ASSEMBLY TIPS & TOOLS 03A Watch the Weather Closely: Be sure the day you choose to install your building is dry and calm. Do NOT attempt to assemble your building on a windy day. Be careful on wet or muddy ground. Use Teamwork: Two or more people are required to assemble your building. One person can hold the parts or panels in place while the other person fastens them together and handles the tools. This makes the process of assembling your building faster and safer.
04BA FREQUENTLY ASKED QUESTIONS Q. How long will it take to assemble the building? A. Assembly time depends on a variety of factors, including roof design, tools available, DIY skill and the pace at which you work. Guidelines for each shed assembly are approximate AFTER completion of the base, and assume two or more people working on the assembly. Generally, you should plan on at least one day working with someone who can assist you; again, after constructing the base.
05BA Q. What kind of base do I use? A. You can: •Pour a concrete slab •Build a wood deck/floor (use exterior-grade plywood) •Use patio blocks •Build on crushed gravel, dirt or grass If you are building a wood deck/floor, an Arrow floor frame kit on top of your deck/floor assembles in minutes and provides a floor frame suitable for a 5/8” exterior-grade plywood floor (not included). A continuous unbroken plastic vapor barrier with a thickness of 6 mil.
06BA PANEL & CHANNEL ASSEMBLY TIPS PANEL 1. Recommend a large table or sawhorses with plywood for working surface. 2. Corners will need to hang off of work surface, so an elevated flat surface is important. 3. Arrows always point up, and always get covered. 4. Start from middle and work your way out to push together panels. 5. Panels can be pulled apart if not aligned properly. Once channels are applied, the wall assembly will be “final”. CHANNEL 6. Work from one end and angle the channel.
CARE & MAINTENANCE... 07BA Exterior Care: For a long lasting finish, clean and wax the exterior surface. We recommend washing with a mild soap solution. DO NOT use power washing to clean your shed. Using a spray automotive type wax periodically on the exterior is highly recommended if you are in a high humidity or coastal climate region. Combustibles and corrosives must be stored in air tight containers designed for chemical and/or combustible storage.
HARDWARE LIST... 08CR Hardware Views by Key No. Key Part No. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 65923 65103 65004 66646 66715 66718 66720 60H 66860 66847 66719 66713 66721 10280 66866 Part Description Qty.
PARTS LIST... Key Part No. No.
ASSEMBLY BY KEY NO.
ASSEMBLY BY KEY NO.
ASSEMBLY OVERVIEW 12CR 1 2 3 4 5 6 12
ASSEMBLY OVERVIEW 13CR 7 8 9 10 13
CONSTRUCTING A BASE... 14CR OPTION 1: Directly on ground (earth) Assemble your building directly on level ground (grass, dirt, rock, sand, etc.). OPTION 2: Wood Platform If you decide to build your own base, be sure to select the appropriate materials.
Step 1: Side Walls (2X) You will need for this page: (QTY: 4) (QTY: 4) 10305 4 10297 4 Wall Channel Floor Channel 11019 4 Channel Splice 10305 11019 10305 10305 11019 10305 11019 11019 12" m 5c 30, 10305 10305 Wall Channel Assemblies (Painted) 10297 11019 10297 10297 11019 10297 11019 11019 10297 10297 Floor Channel Assemblies (Unpainted) 15 12" m 5c 30, 15CR
Step 1: Side Walls (2X) You will need for this page: 10998 10 Panel Wall A 10999 2 Panel Wall 11000 2 A Corner Panel 10998 10998 2 10998 10998 1 10998 A 10999 16 10998 10999 11000 16CR
Step 1: Side Walls (2X) You will need for this page: A (QTY: 8) A 10999 A A A 17 11000 17CR
Step 1: Side Walls (2X) You will need for this page: 2 A IMPORTANT START ASSEMBLY AT CORNER PANEL Wall Channel Assembly Channel WALL CHANNEL ASSEMBLY (Painted) A Channel 18 CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL 18CR
Step 1: Side Walls (2X) You will need for this page: 2 Floor Channel Assembly 10280 4 19CR IMPORTANT A START ASSEMBLY AT CORNER PANEL CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL Corner Clip Channel 11000 10280 A 10280 FLOOR CHANNEL ASSEMBLY (UNPAINTED) 10280 Channel BE SURE TO MAKE TWO (2) SIDE WALL SECTIONS.
Step 2: Rear Wall You will need for this page: (QTY: 2) (QTY: 2) 10341 2 10340 2 Wall Channel Floor Channel 11019 20CR 2 Channel Splice 10341 11019 10341 11019 11019 12" m 5c 30, 10341 10341 Wall Channel Assembly (Painted) 10340 11019 10340 11019 11019 10340 10340 Floor Channel Assembly (Unpainted) 20 12" m 5c 30,
Step 2: Rear Wall You will need for this page: (QTY: 4) A 10998 10998 6 10999 Panel Wall Panel Wall 1 10998 10998 11000 1 21CR A Corner Panel 10998 A A 21 10998 10998 10999 11000
Step 2: Rear Wall IMPORTANT You will need for this page: 1 A Wall Channel Assembly START ASSEMBLY AT CORNER PANEL Channel WALL CHANNEL ASSEMBLY (Painted) A Channel 22 CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL 22CR
Step 2: Rear Wall You will need for this page: 1 Floor Channel Assembly 10280 2 A 23CR IMPORTANT START ASSEMBLY AT CORNER PANEL CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL Corner Clip Channel 11000 10280 A 10280 FLOOR CHANNEL ASSEMBLY (UNPAINTED) 10280 Channel 23
Step 3: Front Wall You will need for this page: (QTY: 4) (QTY: 2) 10341 2 10340 2 Wall Channel Floor Channel 2 11019 Channel Splice 24CR 10291 1 10292 1 Header Trim Ramp 10341 11019 10341 10340 11019 10340 11019 11019 10341 10341 10291 11019 10291 Wall Channel Assembly (Painted) 10341 10340 10340 10292 11019 10340 10292 Floor Channel Assembly (Unpainted) 24 12" m 5c 30,
Step 3: Front Wall You will need for this page: 11024 (QTY: 6) (QTY: 2) 2 Door Jamb 10999 Panel Wall 2 25CR 11000 1 A Corner Panel 11024 11024 10999 10999 RIGHT LEFT RIGHT 11000 A RIGHT A 25
Step 3: Front Wall You will need for this page: 1 (QTY: 4) Wall Channel Assembly 1 Floor Channel Assembly 10280 2 Corner Clip 26CR IMPORTANT START ASSEMBLY AT CORNER PANEL Channel CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL A (QTY: 4) WALL CHANNEL ASSEMBLY (Painted) 10280 RIGHT A 10280 LEFT FLOOR CHANNEL ASSEMBLY (UNPAINTED) Channel IMPORTANT START ASSEMBLY AT CORNER PANEL CORNER MUST BE AGAINST 45 DEGREE CUT ON CHANNEL Channel 11000 A 26
Step 4: Right Door Assy You will need for this page: 11017 (QTY: 4) (QTY: 4) 1 Vertical Door Brace 11026 1 Vertical Door Brace 11025 1 Door Astragal 66715 1 66721 6 U-Nut (Door Clip) Door Handle 66866 2 Door Closure Clip 66721 (2X) 66721 (2X) 11017 66721 (2X) 11025 66866 66715 11026 66866 11025 11026 66715 27 66866 66866 26BO
Step 4: Right Door Assy You will need for this page: 11010 (QTY: 4) Door Panel 1 1 11011 10301 2 Horizontal Door Brace Door Panel 11010 2 Vertical Door Brace Assy 11011 10301 10301 28 27BO
Step 4: Right Door Assy You will need for this page: (QTY: 8) (QTY: 3) 10295 2 Diagonal Door Brace 10295 BACK 10295 FRONT THIS END UP WHEN HANGING DOOR 29 28BO
Step 5: Left Door Assy You will need for this page: 11017 (QTY: 2) 1 Vertical Door Brace 11027 1 Vertical Door Brace 66721 6 U-Nut (Door Clip) 66716 1 Padlock Eyelet 66721 (2X) 66721 (2X) 11017 66721 (2X) 11027 66716 66716 11027 30 29BO
Step 5: Left Door Assy You will need for this page: 11010 (QTY: 4) Door Panel 1 11011 Door Panel 1 10301 2 Horizontal Door Brace 11010 2 Vertical Door Brace Assy 11011 10301 10301 31 30BO
Step 5: Left Door Assy You will need for this page: (QTY: 8) (QTY: 7) 10295 2 66719 1 Diagonal Door Brace Spring Pin Upper 66713 Spring Pin Lower 66719 10295 BACK 10295 66713 THIS END UP WHEN HANGING DOOR FRONT 32 1 31BO
Step 6: Roof pre-assy You will need for this page: (QTY: 8) 10334 4 10335 4 Roof Channel Roof Channel 11019 4 Channel Splice 10335 11019 10334 10335 11019 10334 10335 11019 10334 10335 11019 10334 11019 11019 10335 10334 33 12" m 5c 30, 33CR
Step 6: Roof pre-assy (2X) 34CR You will need for this page: 11020 4 (QTY: 16) Roof Beam Overlap Length 7” (17,8 cm) 11020 11020 11020 11020 80 3/4” (205,1 cm) Finished Length 34
Step 6: Roof pre-assy (2X) 35CR You will need for this page: 2 80119 Roof Panel Left (QTY: 8) 80119 11012 10 11013 Roof Panel Roof Panel Right 11012 11012 2 11012 4 Roof Channel Assembly 11012 11021 4 Fascia Trim 11012 11013 ROOF CHANNEL ASSEMBLY (Painted) 11013 LARGE HOLES IN CHANNELS FACE DOWN 80119 ROOF CHANNEL ASSEMBLY (Painted) Channel 11021 11013 11021 80119 35
Step 6: Roof pre-assy (2X) 36CR You will need for this page: 2 11022 1 11023 1 Roof Beam Assembly (QTY: 16) Ridge Cap Ridge Cap 11013 80119 Large holes face down ROOF BEAM ASSEMBLY Large holes face down SIDE VIEW Large holes face down 11023 11022 11013 80119 RIGHT 36 Large holes face down
Step 7: Wall Assembly You will need for this page: 1 Side Wall Assembly (QTY: 4) 37CR 1 Rear Wall Assembly CORNER PANEL ON TOP OF WALL PANEL A Corner Clip 1 Corner Panel Wall Panel A A 2 B 1 B 2 SIDE WALL ASSEMBLY 37 REAR WALL ASSEMBLY
Step 7: Wall Assembly 38CR You will need for this page: 1 1 Side Wall Assembly Front Wall Assembly D CORNER PANEL ON TOP OF WALL PANEL 1 Corner Clip Corner Panel 2 Wall Panel D D D C 1 C C 2 FRONT WALL ASSEMBLY 38 C SIDE WALL ASSEMBLY
Step 7: Wall Assembly You will need for this page: (QTY: 12) 39 39CR
Step 8: Gable & Beam Assy You will need for this page: 11020 4 (QTY: 12) (QTY: 14) Roof Beam 80115 2 10994 2 Gable Left Gable Right 1 11049 1 Header Angle 11020 11020 2 Overlap Length 7” (17,8 cm) 11020 11020 80 3/4” (205,1 cm) Finished Length BACK 10994 80115 Large holes face down 10994 or 80115 FRONT SIDE VIEW 80115 10994 11049 BACK 40 40CR
Step 8: Gable & Beam Assy You will need for this page: (QTY: 8) 11043 2 (QTY: 8) 7905 4 Roof Beam Brace Gable Brace 41CR 1 Roof Beam Assembly 7905 11043 BACK 11043 7905 OPEN HOLES 11043 7905 7905 7905 FRONT FRONT BACK BACK FRONT 41
Step 9: Roof Assembly You will need for this page: 1 (QTY: 6) Roof Assembly BACK LEFT Large holes face down FRONT FRONT LEFT INSIDE OF BUILDING BACK 42 42CR
Step 9: Roof Assembly You will need for this page: 1 66860 2 Roof Assembly (QTY: 22) 43CR BACK Peak Cap (QTY: 6) RIGHT Large holes face down FRONT FRONT RIGHT 21 1 INSIDE OF BUILDING 4 14 16 18 17 15 22 66860 7 BACK 2 3 19,20 5 8 11022 66860 6 FRONT 43 10 12 13 11 9
Step 9: Roof Assembly You will need for this page: 4 60H (QTY: 8) (QTY: 12) Corner Cap 44CR 66847 4 Vent 66847 60H 66847 60H 60H 66847 60H 66847 FRONT FRONT BACK BACK (4X) INSIDE OF BUILDING 44
Step 9: Roof Assembly You will need for this page: 9204 (QTY: 4 45CR 2 Roof Beam Brace FRONT 9204 11043 (2X) BACK 9204 FRONT INSIDE OF BUILDING 45
Step 10: Door Assembly You will need for this page: (QTY: 14) (QTY: 12 66718 6 Hinge 1 Right Door Assembly 1 Left Door Assembly 66781 66781 66781 66781 66781 66781 66781 FRONT FRONT 46 46CR
ARROW ACCESSORIES... 47CR ANCHOR KITS Model No. AK4 Anchor Kit contains heavy-duty steel augers, 60' (18 m) of steel cable and 4 cable clamps. No digging or concrete pouring, just insert cable under roof, over roof beams, into augers and twist augers into the ground. For buildings larger than 10'x9' (3,0 m x 2,6 m), use 2 kits. FLOOR FRAME KITS MODELS FKEZEE A simple floor frame system made of heavy-duty, hot-dipped galvanized steel. Use as base for plywood, sand or stone. See Page. 48 Model No.
ANCHORING OPTIONS... 39BA IMPORTANT: It is important that building be anchored after construction. These are recommended ways of anchoring. Anchor into Wood or Concrete Arrow Anchoring Kit: (Model No. AK100) For wood platform. Use Decking Screws. For concrete slab. Use Lag Screws. Recommended for use with the concrete base. Contains: Corner gussets, perimeter clips, hardware, 1/4" masonry drill bit and installation instructions. Arrow Anchoring Kit: (Model No.
ASSEMBLY NOTES 49 46A
ASSEMBLY NOTES 50 46A