Full Product Manual

20
Step 1: Side Walls
20CG
Attach Floor Channel Assembly
(Unpainted).
You will need for this page:
Floor Channel
Assembly
2
CORNER MUST BE AGAINST
45 DEGREE CUT ON CHANNEL
Align Floor Channel Assembly
to Panel Ribs and pop into place
at Corner.
23
Continue aligning Channel
Assembly and popping into
place.
24
Corner Clip
4
10280
Channel
Corner Panel
FLOOR CHANNEL ASSEMBLY
(UNPAINTED)
CORNER CLIP
CORNER CLIP
22
START ASSEMBLY AT CORNER PANEL
IMPORTANT
Insert Corner Clips.
25
ELEVATE PANELS TO MAKE
INSTALLING WALL CHANNEL
ASSEMBLY EASIER
ELEVATED PLATFORM
1. Angle Floor Channel Assembly
Channel
Wall Panels
3. Complete Floor Channel
Assembly Install.
Wall Panels
Channel
2. Continue to align Floor Channel
Assembly onto Wall Panels
Wall Panels
Channel
BE SURE TO MAKE TWO (2)
SIDE WALL SECTIONS.