Instructions / Assembly

Step 1
BE13
 Parts Needed For 
Floor Frame Assemblies
 9866 Outer Front Floor Frame (2)
 10201 Center Front Floor Frame (1)
 9868 Rear Floor Frame (2)
STEP
1
9868
Front Floor Frame 95 1/4" 241,9 cm
9868
Rear Floor Frame 95 1/4"
241,9 cm
STEP
2
STEP
3
The front  oor frame is made up of
three pieces. The rear  oor frame is
made up of two pieces. The holes
in these pieces will align when the
pieces are positioned with correct
amount of overlap. The illustrations
below show the proper overall length
for the rear and front. Proceed as
follows:
1 Place the outer front  oor frames
as shown. Position the center front
 oor frame on top of the two outer
front  oor frames. Join the frames by
inserting six bolts and nuts.
2 Overlap the rear  oor frames as
shown. The holes in these pieces will
align when the pieces are positioned
with correct amount of overlap. See
the illustrations below for the proper
overall length of the rear  oor frame.
Join the frames by inserting three
bolts and nuts as shown.
3 Double check the length of each.
95 1/4" 241,9 cm Rear
95 1/4" 241,9 cm Front
10201
9866
9866
13